Re: configuring a USB/Serial port

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Yes, I should have added, I did lsusb, and the futuretk is on usb2, but I tried that command I sent with /dev/usb2 and it gave an invalid device or something like that.
Glenn
----- Original Message -----
Sent: Sunday, July 9, 2023 6:45 PM
Subject: Re: configuring a USB/Serial port


On 9/7/23 19:13, K0LNY wrote:
I am trying to be able to send anything to the Dectalk express.
I have tried configuring the port with the below command, and I get the error
unable to  perform all requested actions
I really don't know what I'm doing, so any advice would be appreciated.
Here's what I'm entering:
stty -F /dev/tty4 9600 cs8 -cstopb -parenb
Check your kernel logs to obtain the name of the device representing the serial port. It's probably /dev/ttyS0 or /dev/ttyusb0 or similar. /dev/tty4 is not it, I'm fairly sure.

[Index of Archives]     [Linux for the Blind]     [Fedora Discussioin]     [Linux Kernel]     [Yosemite News]     [Big List of Linux Books]

  Powered by Linux