Perhaps the people on irc.freenote.net or similar can help; I use mkinitramfs to generate my initial ram disks and you need devmapper support in the kernel you're trying to boot lvm on. Perhaps the speakup kernel is badly configured no idea. Regards, Kerry. ----- Original Message ----- From: "Tony Baechler" <tony@xxxxxxxxxxxx> To: "Speakup is a screen review system for Linux." <speakup at braille.uwo.ca> Sent: Monday, October 13, 2008 5:52 PM Subject: Re: Debian, lilo and LVM won't boot Kerry Hoath wrote: > You need to rebuild the initrd with update-initrams I believe it is called > so it knows about the lvm setup. > You also need to edit the configuration files for > mkinitramfs so it includes all modules including lvm. > I did, several times. Unfortunately, I can't boot to the correct 2.6.25-2-686 kernel because that is on the second drive and the initramfs won't boot, so the only way I can get to my system is with the rescue CD with a custom kernel. I've ran update-initramfs several times and it complains that it can't find /proc/modules. Of course it can't, /proc isn't mounted but I don't think it would matter because the modules are for the wrong kernel anyway. The rescue CD has xfs, lvm and such built in, not loaded as modules, so I don't think that /proc/modules from that kernel would be correct. I've verified that these things are built-in with lsmod. Also, even when it builds an image, it's slightly bigger than my old backups as one would expect, but it still seems to make no difference. After it updates, it runs lilo and lilo gives no errors or warnings but still no boot. I usually run this command: update-initramfs -u I had to use -t at one point because it said I had a custom initramfs when I know I didn't. I could try -c and have it make a new one from scratch but see above about running different kernels. _______________________________________________ Speakup mailing list Speakup at braille.uwo.ca http://speech.braille.uwo.ca/mailman/listinfo/speakup
