When the ISO boots, there is a screen with three choices. The second one is
"boot from CD/DVD" and that's the one you get to by pressing the down arrow.
The tab and space get you to the end of that line so you can add
"speakup_synth=xxx and press enter to bring up the talking install.
Since you want a telnet install, you don't have to put the speakup_synth=xxx
on the line as a boot option but you do still have to do the down arrow,
tab, press space, then put the desired options, such as "telnet" (see the
howto for full details).
----- Original Message -----
From: "Zachary Kline" <Z_kline@xxxxxxxxxxx>
To: "Speakup is a screen review system for Linux." <speakup at braille.uwo.ca>
Sent: Saturday, July 28, 2007 10:19 PM
Subject: Fedora Telnet install?
Hiya,
I have decided to go the route of installing FC7 via Telnet.
However, there is a single point in the instructions which I find
somewhat vague. The speakupmodified.org site states that I should follow
the instructions up to the point where I type at the boot prompt. Does this
include down arrowing and hitting tab and space? What, exactly, do these
keystrokes do?
Thanks much in advance,
Zack.
_______________________________________________
Speakup mailing list
Speakup at braille.uwo.ca
http://speech.braille.uwo.ca/mailman/listinfo/speakup
