where would I get the kernel-2.6.11-1.14_FC3spk.? thx, ----- Original Message ----- From: "Willem van der Walt" <wvdwalt@xxxxxxxxxx> To: "Speakup is a screen review system for Linux." <speakup at braille.uwo.ca> Sent: Monday, February 20, 2006 12:06 AM Subject: Re: help with no sound? > Hello, > I made the same mistake, thinking the audigy cards will work. > It was sold to us as a sound blaster live. To get it to work you need to > install kernel-2.6.11-1.14_FC3spk. > Kudzu will then pick up the card. on the old machine I had it in, the > sound was too fast and crackled. > Another problem is that it also did not seem to support receiving multiple > audio streams at once like the original sb live does. > By the way it uses the snd-ca0106 module as it does not use the emu10k1 > chip. > I think it is a good card, but the software is not there yet. > I have put a older sb-live card in the machine to solve my problem in the > mean while. > I have also at some stage installed the fc4 speakup-modified kernel trying > to get a later version of the driver, but that had a lot of other > side-effects involving udev. > It also did not solve the problem. > If any one had better results, please let me > know? > Regards, Willem > > On Sun, 19 Feb 2006, Tyler Littlefield wrote: > >> ok, I am totally new to this, how do you load a module. >> ----- Original Message ----- >> From: "Gregory Nowak" <greg at romuald.net.eu.org> >> To: "Speakup is a screen review system for Linux." >> <speakup at braille.uwo.ca> >> Sent: Sunday, February 19, 2006 7:54 PM >> Subject: Re: help with no sound? >> >> >>> -----BEGIN PGP SIGNED MESSAGE----- >>> Hash: SHA1 >>> >>> That's supported, and I believe it uses the sblive module. If that's >>> true, and I'm not positive that it is, then you need to load the >>> snd-emu10k1 module. If you want to be absolutely sure which module >>> works with your card, have a look at the list of supported cards, >>> which you should be able to find on alsa-project.org. >>> >>> Greg >>> >>> >>> On Sun, Feb 19, 2006 at 07:37:53PM -0700, Tyler Littlefield wrote: >>>> returned >>>> 0000:00:0d.0 Multimedia audio controller: Creative Labs SB Audigy LS >>>> for the sound. >>> >>> - -- >>> web site: http://www.romuald.net.eu.org >>> gpg public key: http://www.romuald.net.eu.org/pubkey.asc >>> skype: gregn1 >>> (authorization required, add me to your contacts list first) >>> >>> - -- >>> Free domains: http://www.eu.org/ or mail dns-manager at EU.org >>> -----BEGIN PGP SIGNATURE----- >>> Version: GnuPG v1.4.2 (GNU/Linux) >>> >>> iD8DBQFD+S9a7s9z/XlyUyARAg4oAKC8UxTyVb5V7Ko4Cj3EScBkCpEqQACfZMG9 >>> Pf7hIbzhGDiM95V48oW/AfI= >>> =cpOF >>> -----END PGP SIGNATURE----- >>> >>> _______________________________________________ >>> Speakup mailing list >>> Speakup at braille.uwo.ca >>> http://speech.braille.uwo.ca/mailman/listinfo/speakup >> >> >> _______________________________________________ >> Speakup mailing list >> Speakup at braille.uwo.ca >> http://speech.braille.uwo.ca/mailman/listinfo/speakup >> > > -- > This message is subject to the CSIR's copyright, terms and conditions and > e-mail legal notice. Views expressed herein do not necessarily represent > the > views of the CSIR. > > CSIR E-mail Legal Notice > http://mail.csir.co.za/CSIR_eMail_Legal_Notice.html > > CSIR Copyright, Terms and Conditions > http://mail.csir.co.za/CSIR_Copyright.html > > For electronic copies of the CSIR Copyright, Terms and Conditions and the > CSIR > Legal Notice send a blank message with REQUEST LEGAL in the subject line > to > HelpDesk at csir.co.za. > > > This message has been scanned for viruses and dangerous content by > MailScanner, > and is believed to be clean. MailScanner thanks Transtec Computers for > their support. > > > _______________________________________________ > Speakup mailing list > Speakup at braille.uwo.ca > http://speech.braille.uwo.ca/mailman/listinfo/speakup
