help with no sound?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello,
I made the same mistake, thinking the audigy cards will work.
It was sold to us as a sound blaster live.  To get it to work you need to 
install kernel-2.6.11-1.14_FC3spk.
Kudzu will then pick up the card.  on the old machine I had it in, the 
sound was too fast and crackled.
Another problem is that it also did not seem to support receiving multiple 
audio streams at once like the original sb live does.
By the way it uses the snd-ca0106 module as it does not use the emu10k1 
chip.
I think it is a good card, but the software is not there yet.
I have put a older sb-live card in the machine to solve my problem in the 
mean while.
I have also at some stage installed the fc4 speakup-modified kernel trying 
to get a later version of the driver, but that had a lot of other 
side-effects involving udev.
It also did not solve the problem.
If any one had better results, please let me
know?
Regards, Willem

On Sun, 19 Feb 2006, Tyler Littlefield wrote:

> ok, I am totally new to this, how do you load a module.
> ----- Original Message -----
> From: "Gregory Nowak" <greg at romuald.net.eu.org>
> To: "Speakup is a screen review system for Linux." <speakup at braille.uwo.ca>
> Sent: Sunday, February 19, 2006 7:54 PM
> Subject: Re: help with no sound?
>
>
>> -----BEGIN PGP SIGNED MESSAGE-----
>> Hash: SHA1
>>
>> That's supported, and I believe it uses the sblive module. If that's
>> true, and I'm not positive that it is, then you need to load the
>> snd-emu10k1 module. If you want to be absolutely sure which module
>> works with your card, have a look at the list of supported cards,
>> which you should be able to find on alsa-project.org.
>>
>> Greg
>>
>>
>> On Sun, Feb 19, 2006 at 07:37:53PM -0700, Tyler Littlefield wrote:
>>> returned
>>> 0000:00:0d.0 Multimedia audio controller: Creative Labs SB Audigy LS
>>> for the sound.
>>
>> - --
>> web site: http://www.romuald.net.eu.org
>> gpg public key: http://www.romuald.net.eu.org/pubkey.asc
>> skype: gregn1
>> (authorization required, add me to your contacts list first)
>>
>> - --
>> Free domains: http://www.eu.org/ or mail dns-manager at EU.org
>> -----BEGIN PGP SIGNATURE-----
>> Version: GnuPG v1.4.2 (GNU/Linux)
>>
>> iD8DBQFD+S9a7s9z/XlyUyARAg4oAKC8UxTyVb5V7Ko4Cj3EScBkCpEqQACfZMG9
>> Pf7hIbzhGDiM95V48oW/AfI=
>> =cpOF
>> -----END PGP SIGNATURE-----
>>
>> _______________________________________________
>> Speakup mailing list
>> Speakup at braille.uwo.ca
>> http://speech.braille.uwo.ca/mailman/listinfo/speakup
>
>
> _______________________________________________
> Speakup mailing list
> Speakup at braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup
>

-- 
This message is subject to the CSIR's copyright, terms and conditions and
e-mail legal notice. Views expressed herein do not necessarily represent the
views of the CSIR.
 
CSIR E-mail Legal Notice
http://mail.csir.co.za/CSIR_eMail_Legal_Notice.html 
 
CSIR Copyright, Terms and Conditions
http://mail.csir.co.za/CSIR_Copyright.html 
 
For electronic copies of the CSIR Copyright, Terms and Conditions and the CSIR
Legal Notice send a blank message with REQUEST LEGAL in the subject line to
HelpDesk at csir.co.za.


This message has been scanned for viruses and dangerous content by MailScanner, 
and is believed to be clean.  MailScanner thanks Transtec Computers for their support.





[Index of Archives]     [Linux for the Blind]     [Fedora Discussioin]     [Linux Kernel]     [Yosemite News]     [Big List of Linux Books]
  Powered by Linux