Shaun, A simple little set of scripts would be what you are looking for. These scripts will basically all work the same. The only difference in the scripts will be who you wish to transmit your system message to. The steps you would need to take to get everything working for you is to: 1. install rwall and rwall server on the Linux side of the network. 2. start the rwall server. (you may also want to have rwall server start automatically at boot time.) Now for the scripts: You may choose to create a script for each Linux server, so that you can send a message to any or all of the servers from a central locations. e.g. msglinux1 msglinux2 ... You get the idea. You may want to set up a script to send a network wide message. e.g. networkmsg In this script you would also need to include the wall command to also broadcast to the machine that you are sending the global message from. You may want to setup a script to send a message to only windows boxes. e.g. windowmsg This way, you can set up groups or clusters to isolate where you are transmitting to. The script will basically have the command rwall and the destination in it in the case of transmitting to the Linux side of the network. For the windows side, replace rwall with smbclient -M. Steve Dawes Phone: (403) 268-5527 Email: SDawes at calgary.ca NOTICE - This communication is intended ONLY for the use of the person or entity named above and may contain information that is confidential or legally privileged. If you are not the intended recipient named above or a person responsible for delivering messages or communications to the intended recipient, YOU ARE HEREBY NOTIFIED that any use, distribution, or copying of this communication or any of the information contained in it is strictly prohibited. If you have received this communication in error, please notify us immediately by telephone and then destroy or delete this communication, or return it to us by mail if requested by us. The City of Calgary thanks you for your attention and cooperation. > -----Original Message----- > From: speakup-bounces at braille.uwo.ca > [mailto:speakup-bounces at braille.uwo.ca] On Behalf Of Shaun Oliver > Sent: 2004 August 26 4:32 AM > To: Speakup is a screen review system for Linux. > Subject: Re: CALLER ID: > > ok Steve I had another use for this same tool. > here's the scenario. > You're an administrator on a network and you need to quickly > send messages to your various workstations windows or Linux > all at once. > e.g. The system will be undergoing maintenance for a period of x-y-z. > please save all your work and log off now. > that's the idea I had in mind. > either way I'm sure that could be worked into your project. > > -- > Whenever you find that you are on the side of the majority, > it is time to reform. > -- Mark Twain > Shaun Oliver > http://blindman.homelinux.org/~blindman/ > > _______________________________________________ > Speakup mailing list > Speakup at braille.uwo.ca > http://speech.braille.uwo.ca/mailman/listinfo/speakup > >
