Check out the linmodem how-to on the Linux documentation page, tldp.org I think all your questions about your modem will be answered there. If memory serves me correctly, there are 2 how-to's there, linmodem and winmodem. You may need to read both of them to figure everything out. Good luck! Steve Dawes Phone: (403) 268-5527 Email: SDawes at calgary.ca NOTICE - This communication is intended ONLY for the use of the person or entity named above and may contain information that is confidential or legally privileged. If you are not the intended recipient named above or a person responsible for delivering messages or communications to the intended recipient, YOU ARE HEREBY NOTIFIED that any use, distribution, or copying of this communication or any of the information contained in it is strictly prohibited. If you have received this communication in error, please notify us immediately by telephone and then destroy or delete this communication, or return it to us by mail if requested by us. The City of Calgary thanks you for your attention and cooperation. > -----Original Message----- > From: speakup-bounces at braille.uwo.ca > [mailto:speakup-bounces at braille.uwo.ca] On Behalf Of Jayson Smith > Sent: 2004 August 25 1:17 PM > To: Speakup is a screen review system for Linux. > Subject: Re: CALLER ID: > > Ok, this is a bit off topic but not really, cause you gotta > have a modem to use Caller ID! > My system has an internal modem. I got this computer > prebuilt, and the person who built it knew it was to be used > for Linux, but didn't know much about Linux I don't think. > So they put Windows 98 on it, which I immediately trashed. > My question is this. /proc/pci recognizes the modem, but I > can't seem to talk to it using something like Kermit. I have > no idea who the manufacturer of the modem is, or the model. > Would Linux recognize it as a modem even if it is a Winmodem, > totally unusable in Linux? Can any Winmodems be used in > Linux via some driver, kernel patch, etc? > I could hook up a serial modem, except that com1 is used by > my Dectalk Express for Speakup and com2 is used by, get this, > my Apple IIgs! I've been doing some disk image transfers so > I can play with a text-based Apple emulator, etc. > Any thoughts? > Jayson. >
