Hi. Still no go with the capture settings. I did notice something rather peculiar. Note: I did forget to mention that I was running alsa-0.9.0-beta12 I have examined the status of the Capture/Capture Boost channels, and the capture channels are there. However, amixer let's me only set playback on or off? amixer set 'Capture' captureon gives the error: amixer: No such setting captureon. I also checked lsmod and the snd-ac97-codec module was loaded, however there was no mixer controll named AC97Capture or similar. I also set Analog Loopback and Digital Loopback to capture and turned them to 100%, and still no effect. Any other ideas? I will try explicitly enabling capture for 'Capture' in /etc/asound.conf, but don't know if that will work. Thanks! microsoft dialogue This company has performed an illegal operation and will be shut down. If the problem persists, delete winblows and install linux close button On Thu, 5 Sep 2002, Doug Lawlor wrote: > Have a look at your capture settings (AC97Capture and Capture) and make > sure they are on and turned up. Those are two things which could be > causing your problem. > > Doug > > > -- > Make sure your E-mail can be read by everyone! > http://www.betips.net/etc/evilmail.html > > Doug Lawlor <dlawlor at roadrunner.nf.net> > > _______________________________________________ > Speakup mailing list > Speakup at braille.uwo.ca > http://speech.braille.uwo.ca/mailman/listinfo/speakup >
