Hi all. I tried to add in the right parameters in modules.conf for the correct sound card. When I try to do modprobe snd-cs4236 it tells me that lines 93-100 are invalid. I looked at the alsa driver docs, and everything seems to be correct. Can someone look at my modules.conf and see if I am missing something? Thanks in advance! -------------- next part -------------- ### This file is automatically generated by update-modules # # Please do not edit this file directly. If you want to change or add # anything please take a look at the files in /etc/modutils and read # the manpage for update-modules. # ### update-modules: start processing /etc/modutils/0keep # DO NOT MODIFY THIS FILE! # This file is not marked as conffile to make sure if you upgrade modutils # it will be restored in case some modifications have been made. # # The keep command is necessary to prevent insmod and friends from ignoring # the builtin defaults of a path-statement is encountered. Until all other # packages use the new `add path'-statement this keep-statement is essential # to keep your system working keep ### update-modules: end processing /etc/modutils/0keep ### update-modules: start processing /etc/modutils/aliases # Aliases to tell insmod/modprobe which modules to use # Uncomment the network protocols you don't want loaded: # alias net-pf-1 off # Unix # alias net-pf-2 off # IPv4 # alias net-pf-3 off # Amateur Radio AX.25 # alias net-pf-4 off # IPX # alias net-pf-5 off # DDP / appletalk # alias net-pf-6 off # Amateur Radio NET/ROM # alias net-pf-9 off # X.25 # alias net-pf-10 off # IPv6 # alias net-pf-11 off # ROSE / Amateur Radio X.25 PLP # alias net-pf-19 off # Acorn Econet alias char-major-10-130 softdog alias char-major-10-175 agpgart alias char-major-81 bttv alias char-major-108 ppp_generic alias /dev/ppp ppp_generic alias tty-ldisc-3 ppp_async alias tty-ldisc-14 ppp_synctty alias ppp-compress-21 bsd_comp alias ppp-compress-24 ppp_deflate alias ppp-compress-26 ppp_deflate # Crypto modules (see http://www.kerneli.org/) alias loop-xfer-gen-0 loop_gen alias loop-xfer-3 loop_fish2 alias loop-xfer-gen-10 loop_gen alias cipher-2 des alias cipher-3 fish2 alias cipher-4 blowfish alias cipher-6 idea alias cipher-7 serp6f alias cipher-8 mars6 alias cipher-11 rc62 alias cipher-15 dfc2 alias cipher-16 rijndael alias cipher-17 rc5 ### update-modules: end processing /etc/modutils/aliases ### update-modules: start processing /etc/modutils/paths # This file contains a list of paths that modprobe should scan, # beside the once that are compiled into the modutils tools # themselves. # This used to be quite a list, but upstream merged some Debian patches # so we currently don't need to do anything here ### update-modules: end processing /etc/modutils/paths ### update-modules: start processing /etc/modutils/setserial # # This is what I wanted to do, but logger is in /usr/bin, which isn't loaded # when the module is first loaded into the kernel at boot time! # #post-install serial /etc/init.d/setserial start | logger -p daemon.info -t "setserial-module reload" #pre-remove serial /etc/init.d/setserial stop | logger -p daemon.info -t "setserial-module uload" post-install serial /etc/init.d/setserial modload > /dev/null 2> /dev/null pre-remove serial /etc/init.d/setserial modsave > /dev/null 2> /dev/null ### update-modules: end processing /etc/modutils/setserial ### update-modules: start processing /etc/modutils/arch/i386 alias parport_lowlevel parport_pc alias char-major-10-144 nvram alias binfmt-0064 binfmt_aout alias char-major-10-135 rtc ### update-modules: end processing /etc/modutils/arch/i386 module snd-cs4236.o snd_index -1 snd_port 0x534 snd_cport 0x120 snd_irq 5 snd_dma1 0
