How big is the drive you are trying to use? Is the boot partiton below the 8.4gb limit? That is strange that int13 is not controlling the device it should. If your motherboard has udma/66 or udma/100 controllers it needs the 80-wire cable. Some motherboards and drives don't get on so wd released a utility to disable udma/66 with a loss in performance. Does lifeguard show any drive errors? If it does it's the drive's fault. Is the bios the latest that is available for the board? A bios upgrade can fix hard disk recognition problems. Feel free to summarize precisely what is in the machine and how it is hooked up. Motherboard type and bios date if known. processer. ram. type and number of drives. Model numbers of cdrom and hard drives hdd most important. I can't see anything so far that jumps out at me, but something might ring alarm bells when I see the system config. No there are no copyrights on my messages; I just get into a mood where I feel it necessary to rant about something I know things about to either summarize points given, clear missinformation (cable select one slave on a cable) etc. There is a FAQ on ide and the like it is called the Fast ata faq or something available on news.answers look for enhanced ide/ata faq or similar. Regards, Kerry. On Tue, Feb 26, 2002 at 05:05:42PM +0100, Victor Tsaran wrote: > Hi, Kerry! > I think I am going to collect your very informative messages. Are there any > copyrights on them?! > When I ran Western Digital Lifeguard floppy, it told me that int13H is not > supported and that BIOS is not controling your device. > Also, a strange thing happens here. > When I switched 40-pin cable for 80-pin cable, Windows XP would not start, > and only after I, in despair, reflashed BIOS, everything started to work > normally. Don't know what to think about all of this. > Victor > -- Kerry Hoath: kerry at gotss.net kerry at gotss.eu.org or kerry at gotss.spice.net.au
