From: Jonas Gorski <jonas.gorski@xxxxxxxxx>
When bcm63xx-uart was converted to uart_port_tx_limited(), it implicitly
added a call to stop_tx(). This causes garbage to be put out on the
serial console. To fix this, pass UART_TX_NOSTOP in flags, and manually
call stop_tx() ourselves analogue to how a similar issue was fixed in
commit 7be50f2e8f20 ("serial: mxs-auart: fix tx").
Fixes: d11cc8c3c4b6 ("tty: serial: use uart_port_tx_limited()")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Jonas Gorski <jonas.gorski@xxxxxxxxx>
Signed-off-by: Doug Brown <doug@xxxxxxxxxxxxx>
---
drivers/tty/serial/bcm63xx_uart.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/tty/serial/bcm63xx_uart.c b/drivers/tty/serial/bcm63xx_uart.c
index 34801a6f300b..b88cc28c94e3 100644
--- a/drivers/tty/serial/bcm63xx_uart.c
+++ b/drivers/tty/serial/bcm63xx_uart.c
@@ -308,8 +308,8 @@ static void bcm_uart_do_tx(struct uart_port *port)
val = bcm_uart_readl(port, UART_MCTL_REG);
val = (val & UART_MCTL_TXFIFOFILL_MASK) >> UART_MCTL_TXFIFOFILL_SHIFT;
-
- pending = uart_port_tx_limited(port, ch, port->fifosize - val,
+ pending = uart_port_tx_limited_flags(port, ch, UART_TX_NOSTOP,
+ port->fifosize - val,
true,
bcm_uart_writel(port, ch, UART_FIFO_REG),
({}));
@@ -320,6 +320,9 @@ static void bcm_uart_do_tx(struct uart_port *port)
val = bcm_uart_readl(port, UART_IR_REG);
val &= ~UART_TX_INT_MASK;
bcm_uart_writel(port, val, UART_IR_REG);
+
+ if (uart_tx_stopped(port))
+ bcm_uart_stop_tx(port);
}
/*
--
2.34.1
