[PATCH 1/2] serial: samsung: honor fifosize from dts at first

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Currently for platforms which passes UART fifosize from DT gets
override by local driver structure "s3c24xx_serial_drv_data",
which is not indentded. Change the code to honor fifosize from
device tree at first.

Signed-off-by: Tamseel Shams <m.shams@xxxxxxxxxxx>
---
 drivers/tty/serial/samsung_tty.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
index 71d17d804fda..e4c4c9f4f9b0 100644
--- a/drivers/tty/serial/samsung_tty.c
+++ b/drivers/tty/serial/samsung_tty.c
@@ -1990,8 +1990,7 @@ static int s3c24xx_serial_probe(struct platform_device *pdev)
 	}
 
 	if (np) {
-		of_property_read_u32(np,
-			"samsung,uart-fifosize", &ourport->port.fifosize);
+		ret = of_property_read_u32(np, "samsung,uart-fifosize", &ourport->port.fifosize);
 
 		if (of_property_read_u32(np, "reg-io-width", &prop) == 0) {
 			switch (prop) {
@@ -2009,10 +2008,13 @@ static int s3c24xx_serial_probe(struct platform_device *pdev)
 		}
 	}
 
-	if (ourport->drv_data->fifosize[index])
-		ourport->port.fifosize = ourport->drv_data->fifosize[index];
-	else if (ourport->info->fifosize)
-		ourport->port.fifosize = ourport->info->fifosize;
+	if (ret) {
+		if (ourport->drv_data->fifosize[index])
+			ourport->port.fifosize = ourport->drv_data->fifosize[index];
+		else if (ourport->info->fifosize)
+			ourport->port.fifosize = ourport->info->fifosize;
+	}
+
 	ourport->port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_SAMSUNG_CONSOLE);
 
 	/*
-- 
2.17.1





[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux