On 11/10/2023 20:48, Peter Griffin wrote:
> Add initial board support for the Pixel 6 phone code named Oriole. This
> has been tested with a minimal busybox initramfs and boots to a shell.
>
> Signed-off-by: Peter Griffin <peter.griffin@xxxxxxxxxx>
> ---
> arch/arm64/boot/dts/google/Makefile | 4 ++
> arch/arm64/boot/dts/google/gs101-oriole.dts | 79 +++++++++++++++++++++
> 2 files changed, 83 insertions(+)
> create mode 100644 arch/arm64/boot/dts/google/Makefile
> create mode 100644 arch/arm64/boot/dts/google/gs101-oriole.dts
>
> diff --git a/arch/arm64/boot/dts/google/Makefile b/arch/arm64/boot/dts/google/Makefile
> new file mode 100644
> index 000000000000..5cea8ff27141
> --- /dev/null
> +++ b/arch/arm64/boot/dts/google/Makefile
> @@ -0,0 +1,4 @@
> +# SPDX-License-Identifier: GPL-2.0
> +
> +dtb-$(CONFIG_ARCH_GOOGLE_TENSOR) += \
> + gs101-oriole.dtb \
> diff --git a/arch/arm64/boot/dts/google/gs101-oriole.dts b/arch/arm64/boot/dts/google/gs101-oriole.dts
> new file mode 100644
> index 000000000000..3bebca989d34
> --- /dev/null
> +++ b/arch/arm64/boot/dts/google/gs101-oriole.dts
> @@ -0,0 +1,79 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Oriole Device Tree
> + *
> + * Copyright 2021-2023 Google,LLC
> + */
> +
> +/dts-v1/;
> +/plugin/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include "gs101-pinctrl.h"
> +#include "gs101.dtsi"
> +
> +/ {
> + model = "Oriole";
> + compatible = "google,gs101-oriole", "google,gs101";
> +
> + chosen {
> + bootargs = "earlycon=exynos4210,mmio32,0x10A00000 console=ttySAC0";
Nothing improved here.
> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> + pinctrl-names = "default";
> + pinctrl-0 = <&key_voldown &key_volup &key_power>;
> +
> + button-vol-down {
> + label = "KEY_VOLUMEDOWN";
> + linux,code = <KEY_VOLUMEDOWN>;
> + gpios = <&gpa7 3 GPIO_ACTIVE_LOW>;
> + wakeup-source;
> + };
> +
> + button-vol-up {
> + label = "KEY_VOLUMEUP";
> + linux,code = <KEY_VOLUMEUP>;
> + gpios = <&gpa8 1 GPIO_ACTIVE_LOW>;
> + wakeup-source;
> + };
> +
> + button-power {
> + label = "KEY_POWER";
> + linux,code = <KEY_POWER>;
> + gpios = <&gpa10 1 GPIO_ACTIVE_LOW>;
> + wakeup-source;
> + };
> + };
> +};
> +
> +&pinctrl_1 {
> + key_voldown: key-voldown-pins {
> + samsung,pins = "gpa7-3";
> + samsung,pin-function = <0xf>;
GS101_PIN_FUNC_EINT
> + samsung,pin-pud = <0>;
GS101_PIN_PULL_NONE
> + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> + };
> +
> + key_volup: key-volup-pins {
> + samsung,pins = "gpa8-1";
> + samsung,pin-function = <0xf>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> + };
> +};
> +
> +&pinctrl_0 {
> + key_power: key-power-pins {
> + samsung,pins = "gpa10-1";
> + samsung,pin-function = <0xf>;
> + samsung,pin-pud = <0>;
Best regards,
Krzysztof
