Re: [PATCH v3 17/20] arm64: dts: google: Add initial Google gs101 SoC support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 11/10/2023 20:48, Peter Griffin wrote:

...

> diff --git a/arch/arm64/boot/dts/google/gs101.dtsi b/arch/arm64/boot/dts/google/gs101.dtsi
> new file mode 100644
> index 000000000000..37fb0a4dc8d3
> --- /dev/null
> +++ b/arch/arm64/boot/dts/google/gs101.dtsi
> @@ -0,0 +1,504 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * GS101 SoC
> + *
> + * Copyright 2019-2023 Google LLC
> + *
> + */
> +
> +#include <dt-bindings/clock/google,gs101.h>
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +/ {
> +	compatible = "google,gs101";
> +	#address-cells = <2>;
> +	#size-cells = <1>;
> +
> +	interrupt-parent = <&gic>;
> +
> +	aliases {
> +		pinctrl0 = &pinctrl_0;
> +		pinctrl1 = &pinctrl_1;
> +		pinctrl2 = &pinctrl_2;
> +		pinctrl3 = &pinctrl_3;
> +		pinctrl4 = &pinctrl_4;
> +		pinctrl5 = &pinctrl_5;
> +		pinctrl6 = &pinctrl_6;
> +		pinctrl7 = &pinctrl_7;
> +		serial0 = &serial_0;
> +	};
> +
> +	arm-pmu {

pmu-0

> +		compatible = "arm,armv8-pmuv3";
> +		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
> +	};
> +
> +	dsu-pmu-0 {

pmu-1


> +		compatible = "arm,dsu-pmu";
> +		interrupts = <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>;
> +		cpus = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>,
> +		       <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>;
> +	};
> +
> +	/* TODO replace with CCF clock */
> +	dummy_clk: oscillator {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <12345>;
> +		clock-output-names = "pclk";
> +	};
> +
> +	cpus {
> +		#address-cells = <2>;
> +		#size-cells = <0>;
> +
> +		cpu-map {
> +			cluster0 {
> +				core0 {
> +					cpu = <&cpu0>;
> +				};
> +				core1 {
> +					cpu = <&cpu1>;
> +				};
> +				core2 {
> +					cpu = <&cpu2>;
> +				};
> +				core3 {
> +					cpu = <&cpu3>;
> +				};
> +			};
> +
> +			cluster1 {
> +				core0 {
> +					cpu = <&cpu4>;
> +				};
> +				core1 {
> +					cpu = <&cpu5>;
> +				};
> +			};
> +
> +			cluster2 {
> +				core0 {
> +					cpu = <&cpu6>;
> +				};
> +				core1 {
> +					cpu = <&cpu7>;
> +				};
> +			};
> +		};
> +
> +		cpu0: cpu@0 {
> +			device_type = "cpu";
> +			compatible = "arm,armv8";
> +			reg = <0x0 0x0000>;
> +			enable-method = "psci";
> +			cpu-idle-states =  <&ANANKE_CPU_SLEEP>;
> +			capacity-dmips-mhz = <250>;
> +			dynamic-power-coefficient = <70>;
> +		};
> +
> +		cpu1: cpu@100 {
> +			device_type = "cpu";
> +			compatible = "arm,armv8";
> +			reg = <0x0 0x0100>;
> +			enable-method = "psci";
> +			cpu-idle-states =  <&ANANKE_CPU_SLEEP>;
> +			capacity-dmips-mhz = <250>;
> +			dynamic-power-coefficient = <70>;
> +		};
> +
> +		cpu2: cpu@200 {
> +			device_type = "cpu";
> +			compatible = "arm,armv8";
> +			reg = <0x0 0x0200>;
> +			enable-method = "psci";
> +			cpu-idle-states =  <&ANANKE_CPU_SLEEP>;
> +			capacity-dmips-mhz = <250>;
> +			dynamic-power-coefficient = <70>;
> +		};
> +
> +		cpu3: cpu@300 {
> +			device_type = "cpu";
> +			compatible = "arm,armv8";
> +			reg = <0x0 0x0300>;
> +			enable-method = "psci";
> +			cpu-idle-states =  <&ANANKE_CPU_SLEEP>;
> +			capacity-dmips-mhz = <250>;
> +			dynamic-power-coefficient = <70>;
> +		};
> +
> +		cpu4: cpu@400 {
> +			device_type = "cpu";
> +			compatible = "arm,armv8";
> +			reg = <0x0 0x0400>;
> +			enable-method = "psci";
> +			cpu-idle-states =  <&ENYO_CPU_SLEEP>;
> +			capacity-dmips-mhz = <620>;
> +			dynamic-power-coefficient = <284>;
> +		};
> +
> +		cpu5: cpu@500 {
> +			device_type = "cpu";
> +			compatible = "arm,armv8";
> +			reg = <0x0 0x0500>;
> +			enable-method = "psci";
> +			cpu-idle-states =  <&ENYO_CPU_SLEEP>;
> +			capacity-dmips-mhz = <620>;
> +			dynamic-power-coefficient = <284>;
> +		};
> +
> +		cpu6: cpu@600 {
> +			device_type = "cpu";
> +			compatible = "arm,armv8";
> +			reg = <0x0 0x0600>;
> +			enable-method = "psci";
> +			cpu-idle-states =  <&HERA_CPU_SLEEP>;
> +			capacity-dmips-mhz = <1024>;
> +			dynamic-power-coefficient = <650>;
> +		};
> +
> +		cpu7: cpu@700 {
> +			device_type = "cpu";
> +			compatible = "arm,armv8";
> +			reg = <0x0 0x0700>;
> +			enable-method = "psci";
> +			cpu-idle-states =  <&HERA_CPU_SLEEP>;
> +			capacity-dmips-mhz = <1024>;
> +			dynamic-power-coefficient = <650>;
> +		};
> +
> +		idle-states {
> +			entry-method = "psci";
> +
> +			ANANKE_CPU_SLEEP: cpu-ananke-sleep {
> +				idle-state-name = "c2";
> +				compatible = "arm,idle-state";
> +				arm,psci-suspend-param = <0x0010000>;
> +				entry-latency-us = <70>;
> +				exit-latency-us = <160>;
> +				min-residency-us = <2000>;
> +			};
> +
> +			ENYO_CPU_SLEEP: cpu-enyo-sleep {
> +				idle-state-name = "c2";
> +				compatible = "arm,idle-state";
> +				arm,psci-suspend-param = <0x0010000>;
> +				entry-latency-us = <150>;
> +				exit-latency-us = <190>;
> +				min-residency-us = <2500>;
> +			};
> +
> +			HERA_CPU_SLEEP: cpu-hera-sleep {
> +				idle-state-name = "c2";
> +				compatible = "arm,idle-state";
> +				arm,psci-suspend-param = <0x0010000>;
> +				entry-latency-us = <235>;
> +				exit-latency-us = <220>;
> +				min-residency-us = <3500>;
> +			};
> +		};
> +	};
> +
> +	/* bootloader requires ect node */
> +	ect {

This needs bindings.

> +		parameter_address = <0x90000000>;

No underscores in property names. Use hyphen.

> +		parameter_size = <0x53000>;

No underscores.

> +	};
> +
> +	ext_24_5m: clock-1 {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <24576000>;
> +		clock-output-names = "oscclk";
> +	};


Best regards,
Krzysztof




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux