RE: [PATCH v4 1/5] tty: serial: sh-sci: Add RZ/G2L SCIFA DMA tx support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Geert,

> -----Original Message-----
> From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
> Sent: Friday, April 21, 2023 10:22 AM
> To: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
> Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>; Jiri Slaby
> <jirislaby@xxxxxxxxxx>; linux-serial@xxxxxxxxxxxxxxx; Geert Uytterhoeven
> <geert+renesas@xxxxxxxxx>; Prabhakar Mahadev Lad <prabhakar.mahadev-
> lad.rj@xxxxxxxxxxxxxx>; linux-renesas-soc@xxxxxxxxxxxxxxx
> Subject: Re: [PATCH v4 1/5] tty: serial: sh-sci: Add RZ/G2L SCIFA DMA tx
> support
> 
> Hi Biju,
> 
> On Wed, Apr 12, 2023 at 4:51 PM Biju Das <biju.das.jz@xxxxxxxxxxxxxx> wrote:
> > SCIFA IP on RZ/G2L SoC has the same signal for both interrupt and DMA
> > transfer request. Setting DMARS register for DMA transfer makes the
> > signal to work as a DMA transfer request signal and subsequent
> > interrupt requests to the interrupt controller are masked. Similarly
> > clearing DMARS register makes signal to work as interrupt signal and
> > subsequent interrupt requests to the interrupt controller are
> > unmasked.
> >
> > Add SCIFA DMA tx support for RZ/G2L alike SoCs by disabling TXI line
> > interrupt and setting DMARS registers by DMA api for DMA transfer request.
> >
> > Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
> > ---
> > v3->v4:
> >  * Updated commit description by removing tx end interrupt.
> 
> Thanks for the update!
> 
> > --- a/drivers/tty/serial/sh-sci.c
> > +++ b/drivers/tty/serial/sh-sci.c
> > @@ -588,12 +588,17 @@ static void sci_start_tx(struct uart_port *port)
> >
> >         if (s->chan_tx && !uart_circ_empty(&s->port.state->xmit) &&
> >             dma_submit_error(s->cookie_tx)) {
> > +               if (s->cfg->regtype == SCIx_RZ_SCIFA_REGTYPE)
> > +                       /* Switch irq from SCIF to DMA */
> > +                       disable_irq(s->irqs[SCIx_TXI_IRQ]);
> 
> Please wrap this block inside curly braces.

I thought, for single if statement braces not needed.
That is why I haven't added. Am I missing anything here?

Note:
This patch is already applied on tty-next. I need to send a separate patch, if braces is required.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git/commit/?h=tty-next&id=8749061be196b41a874d71c073c03171bf2741b2

Cheers,
Biju

> 
> > +
> 
> The rest LGTM, so
> Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
> 
> Gr{oetje,eeting}s,
> 
>                         Geert
> 
> 
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-
> m68k.org
> 
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like
> that.
>                                 -- Linus Torvalds




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux