Re: [PATCH v3] serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler

[Valentin CARON <valentin.caron@xxxxxxxxxxx>]

Hi Marek,

It is OK for me.

Tested-by: Valentin Caron <valentin.caron@xxxxxxxxxxx>

Thanks,
Valentin

On 12/16/22 12:53, Marek Vasut wrote:
> Requesting an interrupt with IRQF_ONESHOT will run the primary handler
> in the hard-IRQ context even in the force-threaded mode. The
> force-threaded mode is used by PREEMPT_RT in order to avoid acquiring
> sleeping locks (spinlock_t) in hard-IRQ context. This combination
> makes it impossible and leads to "sleeping while atomic" warnings.
>
> Use one interrupt handler for both handlers (primary and secondary)
> and drop the IRQF_ONESHOT flag which is not needed.
>
> Fixes: e359b4411c283 ("serial: stm32: fix threaded interrupt handling")
> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
> Signed-off-by: Marek Vasut <marex@xxxxxxx>
> ---
> Cc: Alexandre Torgue <alexandre.torgue@xxxxxxxxxxx>
> Cc: Erwan Le Ray <erwan.leray@xxxxxxxxxxx>
> Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
> Cc: Jiri Slaby <jirislaby@xxxxxxxxxx>
> Cc: Maxime Coquelin <mcoquelin.stm32@xxxxxxxxx>
> Cc: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
> Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
> Cc: Valentin Caron <valentin.caron@xxxxxxxxxxx>
> Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> Cc: linux-stm32@xxxxxxxxxxxxxxxxxxxxxxxxxxxx
> To: linux-serial@xxxxxxxxxxxxxxx
> ---
> V2: - Update patch subject, was:
>        serial: stm32: Move hard IRQ handling to threaded interrupt context
>      - Use request_irq() instead, rename the IRQ handler function
> V3: - Update the commit message per suggestion from Sebastian
>      - Add RB from Sebastian
>      - Add Fixes tag
> ---
>   drivers/tty/serial/stm32-usart.c | 29 +++++++----------------------
>   1 file changed, 7 insertions(+), 22 deletions(-)
>
> diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
> index dfdbcf092facc..bbbab8dc2bfa9 100644
> --- a/drivers/tty/serial/stm32-usart.c
> +++ b/drivers/tty/serial/stm32-usart.c
> @@ -752,8 +752,9 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr)
>   	struct tty_port *tport = &port->state->port;
>   	struct stm32_port *stm32_port = to_stm32_port(port);
>   	const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs;
> -	u32 sr;
> +	unsigned long flags;
>   	unsigned int size;
> +	u32 sr;
>   
>   	sr = readl_relaxed(port->membase + ofs->isr);
>   
> @@ -793,27 +794,13 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr)
>   	}
>   
>   	if ((sr & USART_SR_TXE) && !(stm32_port->tx_ch)) {
> -		spin_lock(&port->lock);
> +		spin_lock_irqsave(&port->lock, flags);
>   		stm32_usart_transmit_chars(port);
> -		spin_unlock(&port->lock);
> +		spin_unlock_irqrestore(&port->lock, flags);
>   	}
>   
> -	if (stm32_usart_rx_dma_enabled(port))
> -		return IRQ_WAKE_THREAD;
> -	else
> -		return IRQ_HANDLED;
> -}
> -
> -static irqreturn_t stm32_usart_threaded_interrupt(int irq, void *ptr)
> -{
> -	struct uart_port *port = ptr;
> -	struct tty_port *tport = &port->state->port;
> -	struct stm32_port *stm32_port = to_stm32_port(port);
> -	unsigned int size;
> -	unsigned long flags;
> -
>   	/* Receiver timeout irq for DMA RX */
> -	if (!stm32_port->throttled) {
> +	if (stm32_usart_rx_dma_enabled(port) && !stm32_port->throttled) {
>   		spin_lock_irqsave(&port->lock, flags);
>   		size = stm32_usart_receive_chars(port, false);
>   		uart_unlock_and_check_sysrq_irqrestore(port, flags);
> @@ -1016,10 +1003,8 @@ static int stm32_usart_startup(struct uart_port *port)
>   	u32 val;
>   	int ret;
>   
> -	ret = request_threaded_irq(port->irq, stm32_usart_interrupt,
> -				   stm32_usart_threaded_interrupt,
> -				   IRQF_ONESHOT | IRQF_NO_SUSPEND,
> -				   name, port);
> +	ret = request_irq(port->irq, stm32_usart_interrupt,
> +			  IRQF_NO_SUSPEND, name, port);
>   	if (ret)
>   		return ret;
>