* Arnd Bergmann <arnd@xxxxxxxxxx> [220420 19:18]: > On Wed, Apr 20, 2022 at 3:46 PM Aaro Koskinen <aaro.koskinen@xxxxxx> wrote: > > > > Hi, > > > > On Tue, Apr 19, 2022 at 03:37:08PM +0200, Arnd Bergmann wrote: > > > From: Arnd Bergmann <arnd@xxxxxxxx> > > > > > > The address range 0xfee00000-0xfeffffff is used for PCI and > > > PCMCIA I/O port mappings, but OMAP1 has its static mappings > > > there as well. > > > > > > Move the OMAP1 addresses a little higher to avoid crashing > > > at boot. > > > > This has the same problem I reported in 2019, with earlyprintk the > > system no longer boots: > > > > https://marc.info/?t=156530014200005&r=1&w=2 > > > > Tested on OSK and SX1/qemu. > > Thanks a lot for testing! > > I managed to get to the bottom of this after just a few hours, and > it turned out to be a simple math error on my end, as I got > the alignment wrong, the offset has to be 0x00f00000 > instead of 0x00fb0000 be section aligned. I made sure the > kernel boots up (to the point of missing a rootfs) and uploaded > the fixed branch. Good to hear this got sorted out :) Regards, Tony
