Re: [PATCH 26/41] ARM: omap1: relocate static I/O mapping

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Tue, Apr 19, 2022 at 03:37:08PM +0200, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@xxxxxxxx>
> 
> The address range 0xfee00000-0xfeffffff is used for PCI and
> PCMCIA I/O port mappings, but OMAP1 has its static mappings
> there as well.
> 
> Move the OMAP1 addresses a little higher to avoid crashing
> at boot.

This has the same problem I reported in 2019, with earlyprintk the
system no longer boots:

	https://marc.info/?t=156530014200005&r=1&w=2

Tested on OSK and SX1/qemu.

A.

> Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx>
> ---
>  arch/arm/Kconfig.debug                      | 6 +++---
>  arch/arm/mach-omap1/include/mach/hardware.h | 2 +-
>  2 files changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
> index 0c9497d549e3..f57b449000f7 100644
> --- a/arch/arm/Kconfig.debug
> +++ b/arch/arm/Kconfig.debug
> @@ -1837,9 +1837,9 @@ config DEBUG_UART_VIRT
>  	default 0xfec00000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
>  	default 0xfec00003 if ARCH_IXP4XX && CPU_BIG_ENDIAN
>  	default 0xfef36000 if DEBUG_HIGHBANK_UART
> -	default 0xfefb0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1
> -	default 0xfefb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2
> -	default 0xfefb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3
> +	default 0xff000000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1
> +	default 0xff000800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2
> +	default 0xff009800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3
>  	default 0xffd01000 if DEBUG_HIP01_UART
>  	default DEBUG_UART_PHYS if !MMU
>  	depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
> diff --git a/arch/arm/mach-omap1/include/mach/hardware.h b/arch/arm/mach-omap1/include/mach/hardware.h
> index 05c5cd3e95f4..e3522e601ccd 100644
> --- a/arch/arm/mach-omap1/include/mach/hardware.h
> +++ b/arch/arm/mach-omap1/include/mach/hardware.h
> @@ -63,7 +63,7 @@ static inline u32 omap_cs3_phys(void)
>  
>  #endif	/* ifndef __ASSEMBLER__ */
>  
> -#define OMAP1_IO_OFFSET		0x01000000	/* Virtual IO = 0xfefb0000 */
> +#define OMAP1_IO_OFFSET		0x00fb0000	/* Virtual IO = 0xff000000 */
>  #define OMAP1_IO_ADDRESS(pa)	IOMEM((pa) - OMAP1_IO_OFFSET)
>  
>  #include <mach/serial.h>
> -- 
> 2.29.2
> 



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux