Hello Greg, this is v9 of series adding support for higher baudrates on A37xx UART. I've fixed the two things discovered in v8 (commit message typo and order of last two patches). Marek Changes since v8: * fixed typo in commit message of patch 3 * switched patches 5 and 6 as requested by Gregory Clement Changes since v7: * fixed lint errors in yaml binding file * added Reviewed-by tags * changed commit messages and comments a little * fixed indentation at some places * swapped patch 2 and 3 (dt-binding defining new binding should go before the driver adding usage of that new binding) Changes in v6: * fixed yaml binding file and dts files Changes in v5: * fixed yaml binding file Changes in v4: * converted armada3700-uart-clock documentation to YAML * split documentation changes into two commits: - first which adds clock documentation - second which updates UART documentation Changes in v3: v3 is rebased on top of Linus master branch and all already applied patches were dropped. There are no changes in patches itself since v2. Pali Rohár (6): math64: New DIV_U64_ROUND_CLOSEST helper dt-bindings: mvebu-uart: document DT bindings for marvell,armada-3700-uart-clock serial: mvebu-uart: implement UART clock driver for configuring UART base clock dt-bindings: mvebu-uart: update information about UART clock serial: mvebu-uart: implement support for baudrates higher than 230400 Bd arm64: dts: marvell: armada-37xx: add device node for UART clock and use it .../clock/marvell,armada-3700-uart-clock.yaml | 59 ++ .../devicetree/bindings/serial/mvebu-uart.txt | 9 +- arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 14 +- drivers/tty/serial/Kconfig | 1 + drivers/tty/serial/mvebu-uart.c | 596 +++++++++++++++++- include/linux/math64.h | 13 + 6 files changed, 671 insertions(+), 21 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/marvell,armada-3700-uart-clock.yaml -- 2.34.1