[PATCH 1/7] tty: n_gsm: fix encoding of control signal octet bit DV

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010.
See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516
The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to
the newer 27.010 here. Chapter 5.4.6.3.7 describes the encoding of the
control signal octet used by the MSC (modem status command). The same
encoding is also used in convergence layer type 2 as described in chapter
5.5.2. Table 7 and 24 both require the DV (data valid) bit to be set 1 for
outgoing control signal octets sent by the DTE (data terminal equipment),
i.e. for the initiator side.
Currently, the DV bit is only set if CD (carrier detect) is on, regardless
of the side.

This patch fixes this behavior by setting the DV bit on the initiator side
unconditionally.

Fixes: e1eaea46bb40 ("tty: n_gsm line discipline")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Daniel Starke <daniel.starke@xxxxxxxxxxx>
---
 drivers/tty/n_gsm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index 0b1808e3a912..e199315a158e 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -439,7 +439,7 @@ static u8 gsm_encode_modem(const struct gsm_dlci *dlci)
 		modembits |= MDM_RTR;
 	if (dlci->modem_tx & TIOCM_RI)
 		modembits |= MDM_IC;
-	if (dlci->modem_tx & TIOCM_CD)
+	if (dlci->modem_tx & TIOCM_CD || dlci->gsm->initiator)
 		modembits |= MDM_DV;
 	return modembits;
 }
-- 
2.25.1




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux