On Wed, Feb 16, 2022 at 01:17:55AM +0100, Lino Sanfilippo wrote:
> --- a/drivers/tty/serial/serial_core.c
> +++ b/drivers/tty/serial/serial_core.c
> @@ -1282,8 +1282,26 @@ static int uart_set_rs485_config(struct uart_port *port,
> if (copy_from_user(&rs485, rs485_user, sizeof(*rs485_user)))
> return -EFAULT;
>
> + /* pick sane settings if the user hasn't */
> + if (!(rs485.flags & SER_RS485_RTS_ON_SEND) ==
> + !(rs485.flags & SER_RS485_RTS_AFTER_SEND)) {
> + rs485.flags |= SER_RS485_RTS_ON_SEND;
> + rs485.flags &= ~SER_RS485_RTS_AFTER_SEND;
> + }
The policy you're enforcing here is: If settings are nonsensical,
always default to active-high polarity.
However some drivers currently enforce a completely different policy:
E.g. with 8250_lpc18xx.c, if SER_RS485_RTS_ON_SEND is set, use active-high
(and fix up SER_RS485_RTS_AFTER_SEND), else use active-low polarity.
This yields a different result compared to your policy in case both bits
are cleared.
Similarly, sc16is7xx.c defaults to active-low if SER_RS485_RTS_AFTER_SEND
is set, else active-high polarity. This yields a different result compared
to your policy in case both bits are set.
You risk breaking existing user space applications with this change
if those applications specify nonsensical polarity settings.
I happen to have created a similar commit to this one a month ago
and I came to the conclusion that all one can do is offer a library
function uart_sanitize_rs485_mode() which drivers may elect to call
if that helper's policy is identical to what they're doing now:
https://github.com/l1k/linux/commit/637984111e42
> +
> + rs485.delay_rts_before_send = min_t(unsigned int,
> + rs485.delay_rts_before_send,
> + SER_RS485_MAX_RTS_DELAY);
> + rs485.delay_rts_after_send = min_t(unsigned int,
> + rs485.delay_rts_after_send,
> + SER_RS485_MAX_RTS_DELAY);
Nonsensical delays may not only be passed in from user space via ioctl(),
but through the device tree. That's another reason to use a library
function: It can be called both from the ioctl() as well as after (or in)
uart_get_rs485_mode().
> + /* Return clean padding area to userspace */
> + memset(rs485.padding, 0, sizeof(rs485.padding));
Unlike the polarity and delay handling, this one makes sense.
Thanks,
Lukas
