devm_gpiod_get_index() doesn't return NULL but -ENOENT when the
requested GPIO doesn't exist, leading to the following messages:
[ 2.742468] gpiod_direction_input: invalid GPIO (errorpointer)
[ 2.748147] can't set direction for gpio #2: -2
[ 2.753081] gpiod_direction_input: invalid GPIO (errorpointer)
[ 2.758724] can't set direction for gpio #3: -2
[ 2.763666] gpiod_direction_output: invalid GPIO (errorpointer)
[ 2.769394] can't set direction for gpio #4: -2
[ 2.774341] gpiod_direction_input: invalid GPIO (errorpointer)
[ 2.779981] can't set direction for gpio #5: -2
[ 2.784545] ff000a20.serial: ttyCPM1 at MMIO 0xfff00a20 (irq = 39, base_baud = 8250000) is a CPM UART
Use devm_gpiod_get_index_optional() instead.
At the same time, handle the error case and properly exit
with an error.
Fixes: 97cbaf2c829b ("tty: serial: cpm_uart: Convert to use GPIO descriptors")
Cc: stable@xxxxxxxxxxxxxxx
Cc: Linus Walleij <linus.walleij@xxxxxxxxxx>
Signed-off-by: Christophe Leroy <christophe.leroy@xxxxxxxxxx>
---
v2: Using devm_gpiod_get_index_optional() and exiting if error
---
drivers/tty/serial/cpm_uart/cpm_uart_core.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_core.c b/drivers/tty/serial/cpm_uart/cpm_uart_core.c
index a04f74d2e854..4df47d02b34b 100644
--- a/drivers/tty/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/tty/serial/cpm_uart/cpm_uart_core.c
@@ -1215,7 +1215,12 @@ static int cpm_uart_init_port(struct device_node *np,
pinfo->gpios[i] = NULL;
- gpiod = devm_gpiod_get_index(dev, NULL, i, GPIOD_ASIS);
+ gpiod = devm_gpiod_get_index_optional(dev, NULL, i, GPIOD_ASIS);
+
+ if (IS_ERR(gpiod)) {
+ ret = PTR_ERR(gpiod);
+ goto out_irq;
+ }
if (gpiod) {
if (i == GPIO_RTS || i == GPIO_DTR)
@@ -1237,6 +1242,8 @@ static int cpm_uart_init_port(struct device_node *np,
return cpm_uart_request_port(&pinfo->port);
+out_irq:
+ irq_dispose_mapping(pinfo->port.irq);
out_pram:
cpm_uart_unmap_pram(pinfo, pram);
out_mem:
--
2.25.0
