Re: [PATCH v10 3/3] tty: samsung_tty: 32-bit access for TX/RX hold registers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 06. 05. 20, 10:02, Hyunki Koo wrote:
> Support 32-bit access for the TX/RX hold registers UTXH and URXH.
> 
> This is required for some newer SoCs.
> 
> Signed-off-by: Hyunki Koo <hyunki00.koo@xxxxxxxxxxx>
> Reviewed-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
> Tested on Odroid HC1 (Exynos5422):
> Tested-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
> ---
>  drivers/tty/serial/samsung_tty.c | 62 ++++++++++++++++++++++++++++++++++++----
>  1 file changed, 57 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
> index 326b0164609c..6ef614d8648c 100644
> --- a/drivers/tty/serial/samsung_tty.c
> +++ b/drivers/tty/serial/samsung_tty.c
...
> @@ -2000,10 +2023,27 @@ static int s3c24xx_serial_probe(struct platform_device *pdev)
>  			dev_get_platdata(&pdev->dev) :
>  			ourport->drv_data->def_cfg;
>  
> -	if (np)
> +	if (np) {
>  		of_property_read_u32(np,
>  			"samsung,uart-fifosize", &ourport->port.fifosize);
>  
> +		if (of_property_read_u32(np, "reg-io-width", &prop) == 0) {
> +			switch (prop) {
> +			case 1:
> +				ourport->port.iotype = UPIO_MEM;
> +				break;
> +			case 4:
> +				ourport->port.iotype = UPIO_MEM32;
> +				break;
> +			default:
> +				dev_warn(&pdev->dev, "unsupported reg-io-width (%d)\n",
> +						prop);
> +				ret = -EINVAL;
> +				break;

This ret value is unused. Did you intend to return here?

thanks,
-- 
js
suse labs



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux