On Thu, Apr 02, 2020 at 08:04:29PM +0900, Hyunki Koo wrote:
> Support 32-bit access for the TX/RX hold registers UTXH and URXH.
>
> This is required for some newer SoCs.
>
> Signed-off-by: Hyunki Koo <hyunki00.koo@xxxxxxxxxxx>
> ---
> drivers/tty/serial/samsung_tty.c | 78 +++++++++++++++++++++++++++++++++-------
> 1 file changed, 66 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
> index 73f951d65b93..826d8c5846a6 100644
> --- a/drivers/tty/serial/samsung_tty.c
> +++ b/drivers/tty/serial/samsung_tty.c
> @@ -154,12 +154,47 @@ struct s3c24xx_uart_port {
> #define portaddrl(port, reg) \
> ((unsigned long *)(unsigned long)((port)->membase + (reg)))
>
> -#define rd_regb(port, reg) (readb_relaxed(portaddr(port, reg)))
> +static unsigned int rd_reg(struct uart_port *port, int reg)
> +{
> + switch (port->iotype) {
> + case UPIO_MEM:
> + return readb_relaxed(portaddr(port, reg));
> + case UPIO_MEM32:
> + return readl_relaxed(portaddr(port, reg));
> + default:
> + return 0;
> + }
> + return 0;
> +}
> +
> #define rd_regl(port, reg) (readl_relaxed(portaddr(port, reg)))
>
> -#define wr_regb(port, reg, val) writeb_relaxed(val, portaddr(port, reg))
> +static void wr_reg(struct uart_port *port, int reg, int val)
> +{
> + switch (port->iotype) {
> + case UPIO_MEM:
> + writeb_relaxed(val, portaddr(port, reg));
> + break;
> + case UPIO_MEM32:
> + writel_relaxed(val, portaddr(port, reg));
> + break;
> + }
> +}
> +
> #define wr_regl(port, reg, val) writel_relaxed(val, portaddr(port, reg))
>
> +static void write_buf(struct uart_port *port, int reg, int val)
> +{
> + switch (port->iotype) {
> + case UPIO_MEM:
> + writeb(val, portaddr(port, reg));
> + break;
> + case UPIO_MEM32:
> + writel(val, portaddr(port, reg));
> + break;
> + }
> +}
> +
> /* Byte-order aware bit setting/clearing functions. */
>
> static inline void s3c24xx_set_bit(struct uart_port *port, int idx,
> @@ -714,7 +749,7 @@ static void s3c24xx_serial_rx_drain_fifo(struct s3c24xx_uart_port *ourport)
> fifocnt--;
>
> uerstat = rd_regl(port, S3C2410_UERSTAT);
> - ch = rd_regb(port, S3C2410_URXH);
> + ch = rd_reg(port, S3C2410_URXH);
>
> if (port->flags & UPF_CONS_FLOW) {
> int txe = s3c24xx_serial_txempty_nofifo(port);
> @@ -826,7 +861,7 @@ static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id)
> }
>
> if (port->x_char) {
> - wr_regb(port, S3C2410_UTXH, port->x_char);
> + wr_reg(port, S3C2410_UTXH, port->x_char);
> port->icount.tx++;
> port->x_char = 0;
> goto out;
> @@ -852,7 +887,7 @@ static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id)
> if (rd_regl(port, S3C2410_UFSTAT) & ourport->info->tx_fifofull)
> break;
>
> - wr_regb(port, S3C2410_UTXH, xmit->buf[xmit->tail]);
> + wr_reg(port, S3C2410_UTXH, xmit->buf[xmit->tail]);
> xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
> port->icount.tx++;
> count--;
> @@ -916,7 +951,7 @@ static unsigned int s3c24xx_serial_tx_empty(struct uart_port *port)
> /* no modem control lines */
> static unsigned int s3c24xx_serial_get_mctrl(struct uart_port *port)
> {
> - unsigned int umstat = rd_regb(port, S3C2410_UMSTAT);
> + unsigned int umstat = rd_reg(port, S3C2410_UMSTAT);
>
> if (umstat & S3C2410_UMSTAT_CTS)
> return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
> @@ -1974,7 +2009,7 @@ static int s3c24xx_serial_probe(struct platform_device *pdev)
> struct device_node *np = pdev->dev.of_node;
> struct s3c24xx_uart_port *ourport;
> int index = probe_index;
> - int ret;
> + int ret, prop = 0;
>
> if (np) {
> ret = of_alias_get_id(np, "serial");
> @@ -2000,10 +2035,29 @@ static int s3c24xx_serial_probe(struct platform_device *pdev)
> dev_get_platdata(&pdev->dev) :
> ourport->drv_data->def_cfg;
>
> - if (np)
> + if (np) {
> of_property_read_u32(np,
> "samsung,uart-fifosize", &ourport->port.fifosize);
>
> + if (of_property_read_u32(np, "reg-io-width", &prop) == 0) {
> + switch (prop) {
> + case 1:
> + ourport->port.iotype = UPIO_MEM;
> + break;
> + case 4:
> + ourport->port.iotype = UPIO_MEM32;
> + break;
> + default:
> + dev_warn(&pdev->dev, "unsupported reg-io-width (%d)\n",
> + prop);
> + ret = -EINVAL;
> + break;
> + }
> + } else {
> + ourport->port.iotype = UPIO_MEM;
> + }
> + }
I think this still breaks all non-DT platforms (e.g. s3c).
Best regards,
Krzysztof
