Set maximum number of UART ports to 8 as older chips have 5 ports and Tergra186 and later chips will have 8 ports. Add this info to chip data. Read device tree compatible of this driver and register uart driver with max ports of matching chip data. Signed-off-by: Shardar Shariff Md <smohammed@xxxxxxxxxx> Signed-off-by: Krishna Yarlagadda <kyarlagadda@xxxxxxxxxx> --- drivers/tty/serial/serial-tegra.c | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-) diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c index 69af621..8422516 100644 --- a/drivers/tty/serial/serial-tegra.c +++ b/drivers/tty/serial/serial-tegra.c @@ -62,7 +62,7 @@ #define TEGRA_UART_TX_TRIG_4B 0x20 #define TEGRA_UART_TX_TRIG_1B 0x30 -#define TEGRA_UART_MAXIMUM 5 +#define TEGRA_UART_MAXIMUM 8 /* Default UART setting when started: 115200 no parity, stop, 8 data bits */ #define TEGRA_UART_DEFAULT_BAUD 115200 @@ -87,6 +87,7 @@ struct tegra_uart_chip_data { bool allow_txfifo_reset_fifo_mode; bool support_clk_src_div; bool fifo_mode_enable_status; + int uart_max_port; }; struct tegra_uart_port { @@ -1322,6 +1323,7 @@ static struct tegra_uart_chip_data tegra20_uart_chip_data = { .allow_txfifo_reset_fifo_mode = true, .support_clk_src_div = false, .fifo_mode_enable_status = false, + .uart_max_port = 5, }; static struct tegra_uart_chip_data tegra30_uart_chip_data = { @@ -1329,6 +1331,7 @@ static struct tegra_uart_chip_data tegra30_uart_chip_data = { .allow_txfifo_reset_fifo_mode = false, .support_clk_src_div = true, .fifo_mode_enable_status = false, + .uart_max_port = 5, }; static struct tegra_uart_chip_data tegra186_uart_chip_data = { @@ -1336,6 +1339,7 @@ static struct tegra_uart_chip_data tegra186_uart_chip_data = { .allow_txfifo_reset_fifo_mode = false, .support_clk_src_div = true, .fifo_mode_enable_status = true, + .uart_max_port = 8, }; static const struct of_device_id tegra_uart_of_match[] = { @@ -1468,11 +1472,22 @@ static struct platform_driver tegra_uart_platform_driver = { static int __init tegra_uart_init(void) { int ret; + struct device_node *node; + const struct of_device_id *match = NULL; + const struct tegra_uart_chip_data *cdata = NULL; + + node = of_find_matching_node(NULL, tegra_uart_of_match); + if (node) + match = of_match_node(tegra_uart_of_match, node); + if (match) + cdata = match->data; + if (cdata) + tegra_uart_driver.nr = cdata->uart_max_port; ret = uart_register_driver(&tegra_uart_driver); if (ret < 0) { pr_err("Could not register %s driver\n", - tegra_uart_driver.driver_name); + tegra_uart_driver.driver_name); return ret; } -- 2.7.4