Add new compatible string for Tegra186. It differs from earlier chips as it has FIFO mode enable check and 8 byte DMA buffer. Add new compatible string for Tegra194. Tegra194 has different error tolerance levels for baud rate compared to older chips. Signed-off-by: Krishna Yarlagadda <kyarlagadda@xxxxxxxxxx> --- Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt b/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt index d7edf73..dab31d4 100644 --- a/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt +++ b/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt @@ -1,7 +1,12 @@ NVIDIA Tegra20/Tegra30 high speed (DMA based) UART controller driver. Required properties: -- compatible : should be "nvidia,tegra30-hsuart", "nvidia,tegra20-hsuart". +- compatible : should be, + "nvidia,tegra20-hsuart" for Tegra20, + "nvidia,tegra30-hsuart" for Tegra30, + "nvidia,tegra186-hsuart" for Tegra186, + "nvidia,tegra194-hsuart" for Tegra194. + - reg: Should contain UART controller registers location and length. - interrupts: Should contain UART controller interrupts. - clocks: Must contain one entry, for the module clock. -- 2.7.4
