Re: [PATCH 4/4] serial: 8250-mtk: modify uart DMA rx

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, Apr 27, 2019 at 11:36 AM Long Cheng <long.cheng@xxxxxxxxxxxx> wrote:
>
> Modify uart rx and complete for DMA.

I don't know much about the DMA framework, but can you please explain
why you are making the changes in this CL? I see that you are dropping
dma_sync_single_for_device calls, for example, why?

>
> Signed-off-by: Long Cheng <long.cheng@xxxxxxxxxxxx>
> ---
>  drivers/tty/serial/8250/8250_mtk.c |   53 ++++++++++++++++--------------------
>  1 file changed, 23 insertions(+), 30 deletions(-)
>
> diff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c
> index c1fdbc0..04081a6 100644
> --- a/drivers/tty/serial/8250/8250_mtk.c
> +++ b/drivers/tty/serial/8250/8250_mtk.c
> @@ -30,7 +30,6 @@
>  #define MTK_UART_DMA_EN_TX     0x2
>  #define MTK_UART_DMA_EN_RX     0x5
>
> -#define MTK_UART_TX_SIZE       UART_XMIT_SIZE
>  #define MTK_UART_RX_SIZE       0x8000
>  #define MTK_UART_TX_TRIGGER    1
>  #define MTK_UART_RX_TRIGGER    MTK_UART_RX_SIZE
> @@ -64,28 +63,30 @@ static void mtk8250_dma_rx_complete(void *param)
>         struct mtk8250_data *data = up->port.private_data;
>         struct tty_port *tty_port = &up->port.state->port;
>         struct dma_tx_state state;
> +       int copied, cnt, tmp;
>         unsigned char *ptr;
> -       int copied;
>
> -       dma_sync_single_for_cpu(dma->rxchan->device->dev, dma->rx_addr,
> -                               dma->rx_size, DMA_FROM_DEVICE);
> +       if (data->rx_status == DMA_RX_SHUTDOWN)
> +               return;
>
>         dmaengine_tx_status(dma->rxchan, dma->rx_cookie, &state);
> +       cnt = dma->rx_size - state.residue;
> +       tmp = cnt;

I ponder, maybe we should rename cnt to left? (like, how many bytes
are left to transfer, in total) Or maybe "total"
Then maybe rename tmp to cnt.

>
> -       if (data->rx_status == DMA_RX_SHUTDOWN)
> -               return;
> +       if ((data->rx_pos + cnt) > dma->rx_size)
> +               tmp = dma->rx_size - data->rx_pos;

Maybe replace this and the line above:
tmp = max_t(int, cnt, dma->rx_size - data->rx_pos);

>
> -       if ((data->rx_pos + state.residue) <= dma->rx_size) {
> -               ptr = (unsigned char *)(data->rx_pos + dma->rx_buf);
> -               copied = tty_insert_flip_string(tty_port, ptr, state.residue);
> -       } else {
> -               ptr = (unsigned char *)(data->rx_pos + dma->rx_buf);
> -               copied = tty_insert_flip_string(tty_port, ptr,
> -                                               dma->rx_size - data->rx_pos);
> +       ptr = (unsigned char *)(data->rx_pos + dma->rx_buf);
> +       copied = tty_insert_flip_string(tty_port, ptr, tmp);
> +       data->rx_pos += tmp;
> +
> +       if (cnt > tmp) {
>                 ptr = (unsigned char *)(dma->rx_buf);
> -               copied += tty_insert_flip_string(tty_port, ptr,
> -                               data->rx_pos + state.residue - dma->rx_size);
> +               tmp = cnt - tmp;
> +               copied += tty_insert_flip_string(tty_port, ptr, tmp);
> +               data->rx_pos = tmp;
>         }
> +
>         up->port.icount.rx += copied;
>
>         tty_flip_buffer_push(tty_port);
> @@ -96,9 +97,7 @@ static void mtk8250_dma_rx_complete(void *param)
>  static void mtk8250_rx_dma(struct uart_8250_port *up)
>  {
>         struct uart_8250_dma *dma = up->dma;
> -       struct mtk8250_data *data = up->port.private_data;
>         struct dma_async_tx_descriptor  *desc;
> -       struct dma_tx_state      state;
>
>         desc = dmaengine_prep_slave_single(dma->rxchan, dma->rx_addr,
>                                            dma->rx_size, DMA_DEV_TO_MEM,
> @@ -113,12 +112,6 @@ static void mtk8250_rx_dma(struct uart_8250_port *up)
>
>         dma->rx_cookie = dmaengine_submit(desc);
>
> -       dmaengine_tx_status(dma->rxchan, dma->rx_cookie, &state);
> -       data->rx_pos = state.residue;
> -
> -       dma_sync_single_for_device(dma->rxchan->device->dev, dma->rx_addr,
> -                                  dma->rx_size, DMA_FROM_DEVICE);
> -
>         dma_async_issue_pending(dma->rxchan);
>  }
>
> @@ -131,13 +124,13 @@ static void mtk8250_dma_enable(struct uart_8250_port *up)
>         if (data->rx_status != DMA_RX_START)
>                 return;
>
> -       dma->rxconf.direction           = DMA_DEV_TO_MEM;
> -       dma->rxconf.src_addr_width      = dma->rx_size / 1024;
> -       dma->rxconf.src_addr            = dma->rx_addr;
> +       dma->rxconf.direction                           = DMA_DEV_TO_MEM;
> +       dma->rxconf.src_port_window_size        = dma->rx_size;
> +       dma->rxconf.src_addr                            = dma->rx_addr;
>
> -       dma->txconf.direction           = DMA_MEM_TO_DEV;
> -       dma->txconf.dst_addr_width      = MTK_UART_TX_SIZE / 1024;
> -       dma->txconf.dst_addr            = dma->tx_addr;
> +       dma->txconf.direction                           = DMA_MEM_TO_DEV;
> +       dma->txconf.dst_port_window_size        = UART_XMIT_SIZE;
> +       dma->txconf.dst_addr                            = dma->tx_addr;
>
>         serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR |
>                 UART_FCR_CLEAR_XMIT);
> @@ -217,7 +210,7 @@ static void mtk8250_shutdown(struct uart_port *port)
>          * Mediatek UARTs use an extra highspeed register (UART_MTK_HIGHS)
>          *
>          * We need to recalcualte the quot register, as the claculation depends
> -        * on the vaule in the highspeed register.
> +        * on the value in the highspeed register.

Since you're doing some cosmetic changes here, you might as well fix
recalcualte => recalculate and claculation => calculation on the line
above.

But technically, this should belong in another patch...

>          *
>          * Some baudrates are not supported by the chip, so we use the next
>          * lower rate supported and update termios c_flag.
> --
> 1.7.9.5
>



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux