[PATCH 4/4] arm: dts: mt2701: add uart APDMA to device tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



1. add uart APDMA controller device node
2. add uart 0/1/2/3 DMA function
3. uart0 is console, So disable DMA
4. enable uart2 port to test DMA function.

Signed-off-by: Long Cheng <long.cheng@xxxxxxxxxxxx>
---
 arch/arm64/boot/dts/mediatek/mt2712e.dtsi |   50 +++++++++++++++++++++++++++++
 1 file changed, 50 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
index 593ddc7..ff94437 100644
--- a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
@@ -299,6 +299,9 @@
 		interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>;
 		clocks = <&baud_clk>, <&sys_clk>;
 		clock-names = "baud", "bus";
+		dmas = <&apdma 10
+			&apdma 11>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -366,6 +369,38 @@
 		status = "disabled";
 	};
 
+	apdma: dma-controller@11000400 {
+		compatible = "mediatek,mt2712-uart-dma",
+			     "mediatek,mt6577-uart-dma";
+		reg = <0 0x11000400 0 0x80>,
+		      <0 0x11000480 0 0x80>,
+		      <0 0x11000500 0 0x80>,
+		      <0 0x11000580 0 0x80>,
+		      <0 0x11000600 0 0x80>,
+		      <0 0x11000680 0 0x80>,
+		      <0 0x11000700 0 0x80>,
+		      <0 0x11000780 0 0x80>,
+		      <0 0x11000800 0 0x80>,
+		      <0 0x11000880 0 0x80>,
+		      <0 0x11000900 0 0x80>,
+		      <0 0x11000980 0 0x80>;
+		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 105 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 107 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 108 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 109 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 110 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 111 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 114 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_AP_DMA>;
+		clock-names = "apdma";
+		#dma-cells = <1>;
+	};
+
 	uart0: serial@11002000 {
 		compatible = "mediatek,mt2712-uart",
 			     "mediatek,mt6577-uart";
@@ -373,6 +408,9 @@
 		interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
 		clocks = <&baud_clk>, <&sys_clk>;
 		clock-names = "baud", "bus";
+		dmas = <&apdma 0
+			&apdma 1>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -383,6 +421,9 @@
 		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>;
 		clocks = <&baud_clk>, <&sys_clk>;
 		clock-names = "baud", "bus";
+		dmas = <&apdma 2
+			&apdma 3>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -393,6 +434,9 @@
 		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_LOW>;
 		clocks = <&baud_clk>, <&sys_clk>;
 		clock-names = "baud", "bus";
+		dmas = <&apdma 4
+			&apdma 5>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -403,6 +447,9 @@
 		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_LOW>;
 		clocks = <&baud_clk>, <&sys_clk>;
 		clock-names = "baud", "bus";
+		dmas = <&apdma 6
+			&apdma 7>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -503,6 +550,9 @@
 		interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_LOW>;
 		clocks = <&baud_clk>, <&sys_clk>;
 		clock-names = "baud", "bus";
+		dmas = <&apdma 8
+			&apdma 9>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
-- 
1.7.9.5




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux