[PATCH 0/4] add uart DMA function

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



In Mediatek SOCs, the uart can support DMA function.
Base on DMA engine formwork, we add the DMA code to support uart. And put the code under drivers/dma.

This series contains document bindings, Kconfig to control the function enable or not,
device tree including interrupt and dma device node, the code of UART DMA function.

Long Cheng (4):
  dt-bindings: dma: uart: add uart dma bindings
  dmaengine: mtk_uart_dma: add Mediatek uart DMA support
  serial: 8250-mtk: add uart DMA support
  arm: dts: mt2701: add uart APDMA to device tree

 .../devicetree/bindings/dma/8250_mtk_dma.txt       |   32 +
 arch/arm64/boot/dts/mediatek/mt2712e.dtsi          |   50 +
 drivers/dma/8250_mtk_dma.c                         | 1049 ++++++++++++++++++++
 drivers/dma/Kconfig                                |   11 +
 drivers/dma/Makefile                               |    1 +
 drivers/tty/serial/8250/8250_mtk.c                 |  211 +++-
 6 files changed, 1353 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/dma/8250_mtk_dma.txt
 create mode 100644 drivers/dma/8250_mtk_dma.c

-- 
1.7.9.5





[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux