Only one of the two is really required, not both: * have_rtscts or * have_rtsgpio In imx_rs485_config() this is done correctly, so RS485 is working, just the error message is false. Signed-off-by: Phil Eichinger <phil@xxxxxxxxxxxxx> --- drivers/tty/serial/imx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 1d7ca382bc12..a33c685af990 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -2093,7 +2093,7 @@ static int serial_imx_probe(struct platform_device *pdev) uart_get_rs485_mode(&pdev->dev, &sport->port.rs485); if (sport->port.rs485.flags & SER_RS485_ENABLED && - (!sport->have_rtscts || !sport->have_rtsgpio)) + (!sport->have_rtscts && !sport->have_rtsgpio)) dev_err(&pdev->dev, "no RTS control, disabling rs485\n"); imx_rs485_config(&sport->port, &sport->port.rs485); -- 2.11.0 -- -- To unsubscribe from this list: send the line "unsubscribe linux-serial" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
