From: Gerald Baeza <gerald.baeza@xxxxxx>
This patch adds fifo mode support for rx and tx.
A fifo configuration is set in each port structure.
Add has_fifo flag to usart configuration to use fifo only when possible.
Signed-off-by: Gerald Baeza <gerald.baeza@xxxxxx>
Signed-off-by: Bich Hemon <bich.hemon@xxxxxx>
---
drivers/tty/serial/stm32-usart.c | 7 +++++++
drivers/tty/serial/stm32-usart.h | 4 ++++
2 files changed, 11 insertions(+)
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index 684cbe3..b16e7e7 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -468,6 +468,8 @@ static int stm32_startup(struct uart_port *port)
}
val = USART_CR1_RXNEIE | USART_CR1_TE | USART_CR1_RE;
+ if (stm32_port->fifoen)
+ val |= USART_CR1_FIFOEN;
stm32_set_bits(port, ofs->cr1, val);
return 0;
@@ -482,6 +484,8 @@ static void stm32_shutdown(struct uart_port *port)
val = USART_CR1_TXEIE | USART_CR1_RXNEIE | USART_CR1_TE | USART_CR1_RE;
val |= BIT(cfg->uart_enable_bit);
+ if (stm32_port->fifoen)
+ val |= USART_CR1_FIFOEN;
stm32_clr_bits(port, ofs->cr1, val);
dev_pm_clear_wake_irq(port->dev);
@@ -512,6 +516,8 @@ static void stm32_set_termios(struct uart_port *port, struct ktermios *termios,
cr1 = USART_CR1_TE | USART_CR1_RE | USART_CR1_RXNEIE;
cr1 |= BIT(cfg->uart_enable_bit);
+ if (stm32_port->fifoen)
+ cr1 |= USART_CR1_FIFOEN;
cr2 = 0;
cr3 = 0;
@@ -676,6 +682,7 @@ static int stm32_init_port(struct stm32_port *stm32port,
port->dev = &pdev->dev;
port->irq = platform_get_irq(pdev, 0);
stm32port->wakeirq = platform_get_irq(pdev, 1);
+ stm32port->fifoen = stm32port->info->cfg.has_fifo;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
port->membase = devm_ioremap_resource(&pdev->dev, res);
diff --git a/drivers/tty/serial/stm32-usart.h b/drivers/tty/serial/stm32-usart.h
index 5984a66..ffc0c52 100644
--- a/drivers/tty/serial/stm32-usart.h
+++ b/drivers/tty/serial/stm32-usart.h
@@ -26,6 +26,7 @@ struct stm32_usart_config {
u8 uart_enable_bit; /* USART_CR1_UE */
bool has_7bits_data;
bool has_wakeup;
+ bool has_fifo;
};
struct stm32_usart_info {
@@ -94,6 +95,7 @@ struct stm32_usart_info stm32h7_info = {
.uart_enable_bit = 0,
.has_7bits_data = true,
.has_wakeup = true,
+ .has_fifo = true,
}
};
@@ -159,6 +161,7 @@ struct stm32_usart_info stm32h7_info = {
#define USART_CR1_EOBIE BIT(27) /* F7 */
#define USART_CR1_M1 BIT(28) /* F7 */
#define USART_CR1_IE_MASK (GENMASK(8, 4) | BIT(14) | BIT(26) | BIT(27))
+#define USART_CR1_FIFOEN BIT(29) /* H7 */
/* USART_CR2 */
#define USART_CR2_ADD_MASK GENMASK(3, 0) /* F4 */
@@ -253,6 +256,7 @@ struct stm32_port {
int last_res;
bool tx_dma_busy; /* dma tx busy */
bool hw_flow_control;
+ bool fifoen;
int wakeirq;
};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
