[PATCH 6/9] serial: stm32: fix error handling in probe

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>

Disable clock properly in case of error.

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
Signed-off-by: Bich Hemon <bich.hemon@xxxxxx>
---
 drivers/tty/serial/stm32-usart.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index 9158d31..413ff49 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -678,8 +678,10 @@ static int stm32_init_port(struct stm32_port *stm32port,
 		return ret;
 
 	stm32port->port.uartclk = clk_get_rate(stm32port->clk);
-	if (!stm32port->port.uartclk)
+	if (!stm32port->port.uartclk) {
+		clk_disable_unprepare(stm32port->clk);
 		ret = -EINVAL;
+	}
 
 	return ret;
 }
@@ -865,7 +867,7 @@ static int stm32_serial_probe(struct platform_device *pdev)
 
 	ret = uart_add_one_port(&stm32_usart_driver, &stm32port->port);
 	if (ret)
-		return ret;
+		goto err_uninit;
 
 	ret = stm32_of_dma_rx_probe(stm32port, pdev);
 	if (ret)
@@ -878,6 +880,11 @@ static int stm32_serial_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, &stm32port->port);
 
 	return 0;
+
+err_uninit:
+	clk_disable_unprepare(stm32port->clk);
+
+	return ret;
 }
 
 static int stm32_serial_remove(struct platform_device *pdev)
-- 
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux