Less magic that only requires comments.
Signed-off-by: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>
---
Changes in v2:
- move new constants from uapi header into driver
drivers/tty/serial/8250/8250_pci.c | 55 +++++++++++++++++++++++---------------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index c1d4a8f..eff6c2f 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1754,6 +1754,19 @@ static int pci_eg20t_init(struct pci_dev *dev)
#define PCI_DEVICE_ID_EXAR_XR17V4358 0x4358
#define PCI_DEVICE_ID_EXAR_XR17V8358 0x8358
+#define UART_EXAR_MPIOINT_7_0 0x8f /* MPIOINT[7:0] */
+#define UART_EXAR_MPIOLVL_7_0 0x90 /* MPIOLVL[7:0] */
+#define UART_EXAR_MPIO3T_7_0 0x91 /* MPIO3T[7:0] */
+#define UART_EXAR_MPIOINV_7_0 0x92 /* MPIOINV[7:0] */
+#define UART_EXAR_MPIOSEL_7_0 0x93 /* MPIOSEL[7:0] */
+#define UART_EXAR_MPIOOD_7_0 0x94 /* MPIOOD[7:0] */
+#define UART_EXAR_MPIOINT_15_8 0x95 /* MPIOINT[15:8] */
+#define UART_EXAR_MPIOLVL_15_8 0x96 /* MPIOLVL[15:8] */
+#define UART_EXAR_MPIO3T_15_8 0x97 /* MPIO3T[15:8] */
+#define UART_EXAR_MPIOINV_15_8 0x98 /* MPIOINV[15:8] */
+#define UART_EXAR_MPIOSEL_15_8 0x99 /* MPIOSEL[15:8] */
+#define UART_EXAR_MPIOOD_15_8 0x9a /* MPIOOD[15:8] */
+
static int
pci_xr17c154_setup(struct serial_private *priv,
const struct pciserial_board *board,
@@ -1796,18 +1809,18 @@ pci_xr17v35x_setup(struct serial_private *priv,
* Setup Multipurpose Input/Output pins.
*/
if (idx == 0) {
- writeb(0x00, p + 0x8f); /*MPIOINT[7:0]*/
- writeb(0x00, p + 0x90); /*MPIOLVL[7:0]*/
- writeb(0x00, p + 0x91); /*MPIO3T[7:0]*/
- writeb(0x00, p + 0x92); /*MPIOINV[7:0]*/
- writeb(0x00, p + 0x93); /*MPIOSEL[7:0]*/
- writeb(0x00, p + 0x94); /*MPIOOD[7:0]*/
- writeb(0x00, p + 0x95); /*MPIOINT[15:8]*/
- writeb(0x00, p + 0x96); /*MPIOLVL[15:8]*/
- writeb(0x00, p + 0x97); /*MPIO3T[15:8]*/
- writeb(0x00, p + 0x98); /*MPIOINV[15:8]*/
- writeb(0x00, p + 0x99); /*MPIOSEL[15:8]*/
- writeb(0x00, p + 0x9a); /*MPIOOD[15:8]*/
+ writeb(0x00, p + UART_EXAR_MPIOINT_7_0);
+ writeb(0x00, p + UART_EXAR_MPIOLVL_7_0);
+ writeb(0x00, p + UART_EXAR_MPIO3T_7_0);
+ writeb(0x00, p + UART_EXAR_MPIOINV_7_0);
+ writeb(0x00, p + UART_EXAR_MPIOSEL_7_0);
+ writeb(0x00, p + UART_EXAR_MPIOOD_7_0);
+ writeb(0x00, p + UART_EXAR_MPIOINT_15_8);
+ writeb(0x00, p + UART_EXAR_MPIOLVL_15_8);
+ writeb(0x00, p + UART_EXAR_MPIO3T_15_8);
+ writeb(0x00, p + UART_EXAR_MPIOINV_15_8);
+ writeb(0x00, p + UART_EXAR_MPIOSEL_15_8);
+ writeb(0x00, p + UART_EXAR_MPIOOD_15_8);
}
writeb(0x00, p + UART_EXAR_8XMODE);
writeb(UART_FCTR_EXAR_TRGD, p + UART_EXAR_FCTR);
@@ -1843,20 +1856,20 @@ pci_fastcom335_setup(struct serial_private *priv,
switch (priv->dev->device) {
case PCI_DEVICE_ID_COMMTECH_4222PCI335:
case PCI_DEVICE_ID_COMMTECH_4224PCI335:
- writeb(0x78, p + 0x90); /* MPIOLVL[7:0] */
- writeb(0x00, p + 0x92); /* MPIOINV[7:0] */
- writeb(0x00, p + 0x93); /* MPIOSEL[7:0] */
+ writeb(0x78, p + UART_EXAR_MPIOLVL_7_0);
+ writeb(0x00, p + UART_EXAR_MPIOINV_7_0);
+ writeb(0x00, p + UART_EXAR_MPIOSEL_7_0);
break;
case PCI_DEVICE_ID_COMMTECH_2324PCI335:
case PCI_DEVICE_ID_COMMTECH_2328PCI335:
- writeb(0x00, p + 0x90); /* MPIOLVL[7:0] */
- writeb(0xc0, p + 0x92); /* MPIOINV[7:0] */
- writeb(0xc0, p + 0x93); /* MPIOSEL[7:0] */
+ writeb(0x00, p + UART_EXAR_MPIOLVL_7_0);
+ writeb(0xc0, p + UART_EXAR_MPIOINV_7_0);
+ writeb(0xc0, p + UART_EXAR_MPIOSEL_7_0);
break;
}
- writeb(0x00, p + 0x8f); /* MPIOINT[7:0] */
- writeb(0x00, p + 0x91); /* MPIO3T[7:0] */
- writeb(0x00, p + 0x94); /* MPIOOD[7:0] */
+ writeb(0x00, p + UART_EXAR_MPIOINT_7_0);
+ writeb(0x00, p + UART_EXAR_MPIO3T_7_0);
+ writeb(0x00, p + UART_EXAR_MPIOOD_7_0);
}
writeb(0x00, p + UART_EXAR_8XMODE);
writeb(UART_FCTR_EXAR_TRGD, p + UART_EXAR_FCTR);
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
