[PATCH] serial: 8250_pci: Use symbolic constants for EXAR's MPIO registers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Less magics that only require comments.

Signed-off-by: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>
---
 drivers/tty/serial/8250/8250_pci.c | 42 +++++++++++++++++++-------------------
 include/uapi/linux/serial_reg.h    | 13 ++++++++++++
 2 files changed, 34 insertions(+), 21 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index c1d4a8f..7f77060 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1796,18 +1796,18 @@ pci_xr17v35x_setup(struct serial_private *priv,
 	 * Setup Multipurpose Input/Output pins.
 	 */
 	if (idx == 0) {
-		writeb(0x00, p + 0x8f); /*MPIOINT[7:0]*/
-		writeb(0x00, p + 0x90); /*MPIOLVL[7:0]*/
-		writeb(0x00, p + 0x91); /*MPIO3T[7:0]*/
-		writeb(0x00, p + 0x92); /*MPIOINV[7:0]*/
-		writeb(0x00, p + 0x93); /*MPIOSEL[7:0]*/
-		writeb(0x00, p + 0x94); /*MPIOOD[7:0]*/
-		writeb(0x00, p + 0x95); /*MPIOINT[15:8]*/
-		writeb(0x00, p + 0x96); /*MPIOLVL[15:8]*/
-		writeb(0x00, p + 0x97); /*MPIO3T[15:8]*/
-		writeb(0x00, p + 0x98); /*MPIOINV[15:8]*/
-		writeb(0x00, p + 0x99); /*MPIOSEL[15:8]*/
-		writeb(0x00, p + 0x9a); /*MPIOOD[15:8]*/
+		writeb(0x00, p + UART_EXAR_MPIOINT_7_0);
+		writeb(0x00, p + UART_EXAR_MPIOLVL_7_0);
+		writeb(0x00, p + UART_EXAR_MPIO3T_7_0);
+		writeb(0x00, p + UART_EXAR_MPIOINV_7_0);
+		writeb(0x00, p + UART_EXAR_MPIOSEL_7_0);
+		writeb(0x00, p + UART_EXAR_MPIOOD_7_0);
+		writeb(0x00, p + UART_EXAR_MPIOINT_15_8);
+		writeb(0x00, p + UART_EXAR_MPIOLVL_15_8);
+		writeb(0x00, p + UART_EXAR_MPIO3T_15_8);
+		writeb(0x00, p + UART_EXAR_MPIOINV_15_8);
+		writeb(0x00, p + UART_EXAR_MPIOSEL_15_8);
+		writeb(0x00, p + UART_EXAR_MPIOOD_15_8);
 	}
 	writeb(0x00, p + UART_EXAR_8XMODE);
 	writeb(UART_FCTR_EXAR_TRGD, p + UART_EXAR_FCTR);
@@ -1843,20 +1843,20 @@ pci_fastcom335_setup(struct serial_private *priv,
 		switch (priv->dev->device) {
 		case PCI_DEVICE_ID_COMMTECH_4222PCI335:
 		case PCI_DEVICE_ID_COMMTECH_4224PCI335:
-			writeb(0x78, p + 0x90); /* MPIOLVL[7:0] */
-			writeb(0x00, p + 0x92); /* MPIOINV[7:0] */
-			writeb(0x00, p + 0x93); /* MPIOSEL[7:0] */
+			writeb(0x78, p + UART_EXAR_MPIOLVL_7_0);
+			writeb(0x00, p + UART_EXAR_MPIOINV_7_0);
+			writeb(0x00, p + UART_EXAR_MPIOSEL_7_0);
 			break;
 		case PCI_DEVICE_ID_COMMTECH_2324PCI335:
 		case PCI_DEVICE_ID_COMMTECH_2328PCI335:
-			writeb(0x00, p + 0x90); /* MPIOLVL[7:0] */
-			writeb(0xc0, p + 0x92); /* MPIOINV[7:0] */
-			writeb(0xc0, p + 0x93); /* MPIOSEL[7:0] */
+			writeb(0x00, p + UART_EXAR_MPIOLVL_7_0);
+			writeb(0xc0, p + UART_EXAR_MPIOINV_7_0);
+			writeb(0xc0, p + UART_EXAR_MPIOSEL_7_0);
 			break;
 		}
-		writeb(0x00, p + 0x8f); /* MPIOINT[7:0] */
-		writeb(0x00, p + 0x91); /* MPIO3T[7:0] */
-		writeb(0x00, p + 0x94); /* MPIOOD[7:0] */
+		writeb(0x00, p + UART_EXAR_MPIOINT_7_0);
+		writeb(0x00, p + UART_EXAR_MPIO3T_7_0);
+		writeb(0x00, p + UART_EXAR_MPIOOD_7_0);
 	}
 	writeb(0x00, p + UART_EXAR_8XMODE);
 	writeb(UART_FCTR_EXAR_TRGD, p + UART_EXAR_FCTR);
diff --git a/include/uapi/linux/serial_reg.h b/include/uapi/linux/serial_reg.h
index 1e5ac4e7..d176448 100644
--- a/include/uapi/linux/serial_reg.h
+++ b/include/uapi/linux/serial_reg.h
@@ -376,5 +376,18 @@
 #define UART_EXAR_TXTRG		0x0a	/* Tx FIFO trigger level write-only */
 #define UART_EXAR_RXTRG		0x0b	/* Rx FIFO trigger level write-only */
 
+#define UART_EXAR_MPIOINT_7_0	0x8f	/* MPIOINT[7:0] */
+#define UART_EXAR_MPIOLVL_7_0	0x90	/* MPIOLVL[7:0] */
+#define UART_EXAR_MPIO3T_7_0	0x91	/* MPIO3T[7:0] */
+#define UART_EXAR_MPIOINV_7_0	0x92	/* MPIOINV[7:0] */
+#define UART_EXAR_MPIOSEL_7_0	0x93	/* MPIOSEL[7:0] */
+#define UART_EXAR_MPIOOD_7_0	0x94	/* MPIOOD[7:0] */
+#define UART_EXAR_MPIOINT_15_8	0x95	/* MPIOINT[15:8] */
+#define UART_EXAR_MPIOLVL_15_8	0x96	/* MPIOLVL[15:8] */
+#define UART_EXAR_MPIO3T_15_8	0x97	/* MPIO3T[15:8] */
+#define UART_EXAR_MPIOINV_15_8	0x98	/* MPIOINV[15:8] */
+#define UART_EXAR_MPIOSEL_15_8	0x99	/* MPIOSEL[15:8] */
+#define UART_EXAR_MPIOOD_15_8	0x9a	/* MPIOOD[15:8] */
+
 #endif /* _LINUX_SERIAL_REG_H */
 
-- 
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux