A bugfix for the fintek driver required defining some macros, but one of them clashes with a system header on ARM: drivers/tty/serial/8250/8250_fintek.c:34:0: error: "IRQ_MODE" redefined [-Werror] #define IRQ_MODE 0x70 In file included from /git/arm-soc/arch/arm/include/asm/ptrace.h:13:0, from /git/arm-soc/arch/arm/include/asm/irqflags.h:6, from /git/arm-soc/include/linux/irqflags.h:15, from /git/arm-soc/arch/arm/include/asm/bitops.h:27, from /git/arm-soc/include/linux/bitops.h:36, from /git/arm-soc/include/linux/kernel.h:10, from /git/arm-soc/include/linux/list.h:8, from /git/arm-soc/include/linux/module.h:9, from /git/arm-soc/drivers/tty/serial/8250/8250_fintek.c:11: arch/arm/include/uapi/asm/ptrace.h:55:0: note: this is the location of the previous definition This renames the newly introduced 'IRQ_MODE' macro to FINTEK_IRQ_MODE. Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx> Fixes: 4da22f1418cb ("serial: 8250_fintek: fix the mismatched IRQ mode") --- drivers/tty/serial/8250/8250_fintek.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/tty/serial/8250/8250_fintek.c b/drivers/tty/serial/8250/8250_fintek.c index 737b4b3957b0..0facc789fe7d 100644 --- a/drivers/tty/serial/8250/8250_fintek.c +++ b/drivers/tty/serial/8250/8250_fintek.c @@ -31,7 +31,7 @@ #define IO_ADDR2 0x60 #define LDN 0x7 -#define IRQ_MODE 0x70 +#define FINTEK_IRQ_MODE 0x70 #define IRQ_SHARE BIT(4) #define IRQ_MODE_MASK (BIT(6) | BIT(5)) #define IRQ_LEVEL_LOW 0 @@ -195,7 +195,7 @@ static int fintek_8250_set_irq_mode(struct fintek_8250 *pdata, bool level_mode) outb(LDN, pdata->base_port + ADDR_PORT); outb(pdata->index, pdata->base_port + DATA_PORT); - outb(IRQ_MODE, pdata->base_port + ADDR_PORT); + outb(FINTEK_IRQ_MODE, pdata->base_port + ADDR_PORT); tmp = inb(pdata->base_port + DATA_PORT); tmp &= ~IRQ_MODE_MASK; -- 2.9.0 -- To unsubscribe from this list: send the line "unsubscribe linux-serial" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html