Re: [PATCH 6/9] arm: twr-k70f120m: clock source drivers for Kinetis SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 23 Jun 2015, Paul Osmialowski wrote:
> +/*
> + * Clock event device set mode function
> + */
> +static void kinetis_clockevent_tmr_set_mode(
> +	enum clock_event_mode mode, struct clock_event_device *clk)
> +{
> +	struct kinetis_clock_event_ddata *pit =
> +		container_of(clk, struct kinetis_clock_event_ddata, evtdev);
> +
> +	switch (mode) {
> +	case CLOCK_EVT_MODE_PERIODIC:
> +		kinetis_pit_enable(pit->base, 1);
> +		break;
> +	case CLOCK_EVT_MODE_ONESHOT:
> +	case CLOCK_EVT_MODE_UNUSED:
> +	case CLOCK_EVT_MODE_SHUTDOWN:
> +	default:
> +		kinetis_pit_enable(pit->base, 0);
> +	}
> +}

Please move to the new set_state_* interfaces. set_mode() is deprecated.

> +static int kinetis_clockevent_tmr_set_next_event(
> +	unsigned long delta, struct clock_event_device *c)
> +{
> +	struct kinetis_clock_event_ddata *pit =
> +		container_of(c, struct kinetis_clock_event_ddata, evtdev);
> +	unsigned long flags;
> +
> +	raw_local_irq_save(flags);

Pointless exercise. This is called with interrupts disabled.

> +	kinetis_pit_init(pit->base, delta);
> +	kinetis_pit_enable(pit->base, 1);
> +	raw_local_irq_restore(flags);


> +static struct irqaction kinetis_clockevent_irqaction[KINETIS_PIT_CHANNELS] = {
> +	{
> +		.name = "Kinetis Kernel Time Tick (pit0)",

Please use oneword descriptive names not half sentences.

> +		.flags = IRQF_TIMER | IRQF_IRQPOLL,
> +		.dev_id = &kinetis_clockevent_tmrs[0],
> +		.handler = kinetis_clockevent_tmr_irq_handler,
> +	}, {
> +		.name = "Kinetis Kernel Time Tick (pit1)",
> +		.flags = IRQF_TIMER | IRQF_IRQPOLL,
> +		.dev_id = &kinetis_clockevent_tmrs[1],
> +		.handler = kinetis_clockevent_tmr_irq_handler,
> +	}, {
> +		.name = "Kinetis Kernel Time Tick (pit2)",
> +		.flags = IRQF_TIMER | IRQF_IRQPOLL,
> +		.dev_id = &kinetis_clockevent_tmrs[2],
> +		.handler = kinetis_clockevent_tmr_irq_handler,
> +	}, {
> +		.name = "Kinetis Kernel Time Tick (pit3)",
> +		.flags = IRQF_TIMER | IRQF_IRQPOLL,
> +		.dev_id = &kinetis_clockevent_tmrs[3],
> +		.handler = kinetis_clockevent_tmr_irq_handler,
> +	},

Aside of that. Please use standard request_irq() there is no reason to
use setup_irq here.

> +
> +	setup_irq(irq, &(kinetis_clockevent_irqaction[chan]));

  request_irq(irq, handler, flags, "name", &kinetis_clockevent_tmrs[chan]);

....

Thanks,

	tglx
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux