[Trimmed greg at what I'm interpreting as his request.]
On 06/18/2015 02:36 PM, Geert Uytterhoeven wrote:
> Hi Rob,
>
> On Thu, Jun 18, 2015 at 7:19 PM, Rob Landley <rob@xxxxxxxxxxx> wrote:
>> Changes to existing files to add 0pf j2 board support.
>
> Thanks for your patch!
>
> Like Greg already said, splitting it up in logical parts and providing useful
> patch descriptions would be highly appreciated.
I actually don't know how to split it up further. The initial port was
done by a series of contractors (in Russia, I think), and then I
inherited it to try to get something releasable. This is the smallest
chunk I could get to actually boot.
I suppose I could send you the serial driver by itself, and _then_ the
board, but it wouldn't compile if nothing uses it. (Similarly you can't
boot the board without a serial console...)
>> diff --git a/arch/sh/Makefile b/arch/sh/Makefile
>> index bf5b3f5..e609157 100644
>> --- a/arch/sh/Makefile
>> +++ b/arch/sh/Makefile
>
>> @@ -31,6 +33,7 @@ isa-y := $(isa-y)-up
>> endif
>>
>> cflags-$(CONFIG_CPU_SH2) := $(call cc-option,-m2,)
>> +cflags-$(CONFIG_CPU_SH2J) := $(call cc-option,-m2,)
>
> This is superfluous, as CPU_SH2J selects CPU_SH2.
Ooh, thanks.
>> diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c
>> index eb10ff8..7de9bcb 100644
>> --- a/arch/sh/kernel/irq.c
>> +++ b/arch/sh/kernel/irq.c
>> @@ -20,6 +20,8 @@
>> #include <asm/thread_info.h>
>> #include <cpu/mmu_context.h>
>>
>> +#include <asm/board-0pf.h>
>
> Board-specific inclusion in generic sh source file?
Gah, I thought I'd whacked all of those. (Staring at it too long to see
some of this stuff anymore...)
>> +
>> atomic_t irq_err_count;
>>
>> /*
>> @@ -175,11 +177,24 @@ void do_softirq_own_stack(void)
>> );
>> }
>> #else
>> +#define noinline __attribute__((noinline))
>> +static noinline void handle_irq_UART0(unsigned int irq) { generic_handle_irq(irq); }
>> +static noinline void handle_irq_UART1(unsigned int irq) { generic_handle_irq(irq); }
>> +static noinline void handle_irq_GPS(unsigned int irq) { generic_handle_irq(irq); }
>> +static noinline void handle_irq_EMAC(unsigned int irq) { generic_handle_irq(irq); }
>> static inline void handle_one_irq(unsigned int irq)
>> {
>> - generic_handle_irq(irq);
>> + switch(irq) {
>> + case Irq_UART0: handle_irq_UART0(irq); break;
>> + case Irq_UART1: handle_irq_UART1(irq); break;
>> + case Irq_GPS: handle_irq_GPS(irq); break;
>> + case Irq_EMAC: handle_irq_EMAC(irq); break;
>> + default:
>> + generic_handle_irq(irq);
>> + break;
>> + }
>
> What's the purpose of this change?
Honestly, your guess is as good as mine. (Sorry, I'll move it to a
board-specific file. I mentioned needing to redo the interrupt logic
_entirely_, it should totally be using SPARSE_IRQ. And in fact most of
the above is for drivers I trimmed out of this submission anyway.)
>> }
>> -#endif
>> +#endif // CONFIG_IRQSTACKS
>
> Please no C++-style comments (scripts/checkpatch.pl?)
I expect it to try to reach through the screen and throttle me, but sure...
(Now the reason _I_ thought you'd reject it had more to do with not
having converted it to device tree yet, and things on that level. But I
wanted to get it out there so people outside $DAYJOB can test the
hardware. We did a linuxcon japan presentation which lwn.net covered,
and we're getting pokes about "where can I download this", so...)
Rob
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
