Support for IRDA was added in 2009 in commit v2.6.31-rc1~399^2~2. There
are no in-tree users.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
---
drivers/tty/serial/imx.c | 157 ++-----------------------------
include/linux/platform_data/serial-imx.h | 5 -
2 files changed, 9 insertions(+), 153 deletions(-)
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index e74dd74d84d0..95bd0a5ae0d1 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -6,9 +6,6 @@
* Author: Sascha Hauer <sascha@xxxxxxxxxxxxxx>
* Copyright (C) 2004 Pengutronix
*
- * Author: Fabian Godehardt (added IrDA support for iMX)
- * Copyright (C) 2009 emlix GmbH
- *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
@@ -201,7 +198,6 @@ struct imx_port {
unsigned int old_status;
unsigned int have_rtscts:1;
unsigned int dte_mode:1;
- unsigned int use_irda:1;
unsigned int irda_inv_rx:1;
unsigned int irda_inv_tx:1;
unsigned short trcv_delay; /* transceiver delay */
@@ -228,12 +224,6 @@ struct imx_port_ucrs {
unsigned int ucr3;
};
-#ifdef CONFIG_IRDA
-#define USE_IRDA(sport) ((sport)->use_irda)
-#else
-#define USE_IRDA(sport) (0)
-#endif
-
static struct imx_uart_data imx_uart_devdata[] = {
[IMX1_UART] = {
.uts_reg = IMX1_UTS,
@@ -368,48 +358,6 @@ static void imx_stop_tx(struct uart_port *port)
struct imx_port *sport = (struct imx_port *)port;
unsigned long temp;
- if (USE_IRDA(sport)) {
- /* half duplex - wait for end of transmission */
- int n = 256;
- while ((--n > 0) &&
- !(readl(sport->port.membase + USR2) & USR2_TXDC)) {
- udelay(5);
- barrier();
- }
- /*
- * irda transceiver - wait a bit more to avoid
- * cutoff, hardware dependent
- */
- udelay(sport->trcv_delay);
-
- /*
- * half duplex - reactivate receive mode,
- * flush receive pipe echo crap
- */
- if (readl(sport->port.membase + USR2) & USR2_TXDC) {
- temp = readl(sport->port.membase + UCR1);
- temp &= ~(UCR1_TXMPTYEN | UCR1_TRDYEN);
- writel(temp, sport->port.membase + UCR1);
-
- temp = readl(sport->port.membase + UCR4);
- temp &= ~(UCR4_TCEN);
- writel(temp, sport->port.membase + UCR4);
-
- while (readl(sport->port.membase + URXD0) &
- URXD_CHARRDY)
- barrier();
-
- temp = readl(sport->port.membase + UCR1);
- temp |= UCR1_RRDYEN;
- writel(temp, sport->port.membase + UCR1);
-
- temp = readl(sport->port.membase + UCR4);
- temp |= UCR4_DREN;
- writel(temp, sport->port.membase + UCR4);
- }
- return;
- }
-
/*
* We are maybe in the SMP context, so if the DMA TX thread is running
* on other cpu, we have to wait for it to finish.
@@ -612,32 +560,11 @@ static void imx_start_tx(struct uart_port *port)
struct imx_port *sport = (struct imx_port *)port;
unsigned long temp;
- if (USE_IRDA(sport)) {
- /* half duplex in IrDA mode; have to disable receive mode */
- temp = readl(sport->port.membase + UCR4);
- temp &= ~(UCR4_DREN);
- writel(temp, sport->port.membase + UCR4);
-
- temp = readl(sport->port.membase + UCR1);
- temp &= ~(UCR1_RRDYEN);
- writel(temp, sport->port.membase + UCR1);
- }
-
if (!sport->dma_is_enabled) {
temp = readl(sport->port.membase + UCR1);
writel(temp | UCR1_TXMPTYEN, sport->port.membase + UCR1);
}
- if (USE_IRDA(sport)) {
- temp = readl(sport->port.membase + UCR1);
- temp |= UCR1_TRDYEN;
- writel(temp, sport->port.membase + UCR1);
-
- temp = readl(sport->port.membase + UCR4);
- temp |= UCR4_TCEN;
- writel(temp, sport->port.membase + UCR4);
- }
-
if (sport->dma_is_enabled) {
if (sport->port.x_char) {
/* We have X-char to send, so enable TX IRQ and
@@ -1148,9 +1075,6 @@ static int imx_startup(struct uart_port *port)
*/
temp = readl(sport->port.membase + UCR4);
- if (USE_IRDA(sport))
- temp |= UCR4_IRSC;
-
/* set the trigger level for CTS */
temp &= ~(UCR4_CTSTL_MASK << UCR4_CTSTL_SHF);
temp |= CTSTL << UCR4_CTSTL_SHF;
@@ -1186,11 +1110,6 @@ static int imx_startup(struct uart_port *port)
temp = readl(sport->port.membase + UCR1);
temp |= UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN;
- if (USE_IRDA(sport)) {
- temp |= UCR1_IREN;
- temp &= ~(UCR1_RTSDEN);
- }
-
writel(temp, sport->port.membase + UCR1);
temp = readl(sport->port.membase + UCR4);
@@ -1209,38 +1128,12 @@ static int imx_startup(struct uart_port *port)
writel(temp, sport->port.membase + UCR3);
}
- if (USE_IRDA(sport)) {
- temp = readl(sport->port.membase + UCR4);
- if (sport->irda_inv_rx)
- temp |= UCR4_INVR;
- else
- temp &= ~(UCR4_INVR);
- writel(temp | UCR4_DREN, sport->port.membase + UCR4);
-
- temp = readl(sport->port.membase + UCR3);
- if (sport->irda_inv_tx)
- temp |= UCR3_INVT;
- else
- temp &= ~(UCR3_INVT);
- writel(temp, sport->port.membase + UCR3);
- }
-
/*
* Enable modem status interrupts
*/
imx_enable_ms(&sport->port);
spin_unlock_irqrestore(&sport->port.lock, flags);
- if (USE_IRDA(sport)) {
- struct imxuart_platform_data *pdata;
- pdata = dev_get_platdata(sport->port.dev);
- sport->irda_inv_rx = pdata->irda_inv_rx;
- sport->irda_inv_tx = pdata->irda_inv_tx;
- sport->trcv_delay = pdata->transceiver_delay;
- if (pdata->irda_enable)
- pdata->irda_enable(1);
- }
-
return 0;
}
@@ -1276,13 +1169,6 @@ static void imx_shutdown(struct uart_port *port)
writel(temp, sport->port.membase + UCR2);
spin_unlock_irqrestore(&sport->port.lock, flags);
- if (USE_IRDA(sport)) {
- struct imxuart_platform_data *pdata;
- pdata = dev_get_platdata(sport->port.dev);
- if (pdata->irda_enable)
- pdata->irda_enable(0);
- }
-
/*
* Stop our timer.
*/
@@ -1295,8 +1181,6 @@ static void imx_shutdown(struct uart_port *port)
spin_lock_irqsave(&sport->port.lock, flags);
temp = readl(sport->port.membase + UCR1);
temp &= ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN);
- if (USE_IRDA(sport))
- temp &= ~(UCR1_IREN);
writel(temp, sport->port.membase + UCR1);
spin_unlock_irqrestore(&sport->port.lock, flags);
@@ -1452,24 +1336,16 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios,
sport->port.membase + UCR2);
old_txrxen &= (UCR2_TXEN | UCR2_RXEN);
- if (USE_IRDA(sport)) {
- /*
- * use maximum available submodule frequency to
- * avoid missing short pulses due to low sampling rate
- */
+ /* custom-baudrate handling */
+ div = sport->port.uartclk / (baud * 16);
+ if (baud == 38400 && quot != div)
+ baud = sport->port.uartclk / (quot * 16);
+
+ div = sport->port.uartclk / (baud * 16);
+ if (div > 7)
+ div = 7;
+ if (!div)
div = 1;
- } else {
- /* custom-baudrate handling */
- div = sport->port.uartclk / (baud * 16);
- if (baud == 38400 && quot != div)
- baud = sport->port.uartclk / (quot * 16);
-
- div = sport->port.uartclk / (baud * 16);
- if (div > 7)
- div = 7;
- if (!div)
- div = 1;
- }
rational_best_approximation(16 * div * baud, sport->port.uartclk,
1 << 16, 1 << 16, &num, &denom);
@@ -1908,9 +1784,6 @@ static int serial_imx_probe_dt(struct imx_port *sport,
if (of_get_property(np, "fsl,uart-has-rtscts", NULL))
sport->have_rtscts = 1;
- if (of_get_property(np, "fsl,irda-mode", NULL))
- sport->use_irda = 1;
-
if (of_get_property(np, "fsl,dte-mode", NULL))
sport->dte_mode = 1;
@@ -1939,9 +1812,6 @@ static void serial_imx_probe_pdata(struct imx_port *sport,
if (pdata->flags & IMXUART_HAVE_RTSCTS)
sport->have_rtscts = 1;
-
- if (pdata->flags & IMXUART_IRDA)
- sport->use_irda = 1;
}
static int serial_imx_probe(struct platform_device *pdev)
@@ -2014,15 +1884,6 @@ static int serial_imx_probe(struct platform_device *pdev)
dev_name(&pdev->dev), sport);
if (ret)
return ret;
-
- /* do not use RTS IRQ on IrDA */
- if (!USE_IRDA(sport)) {
- ret = devm_request_irq(&pdev->dev, rtsirq,
- imx_rtsint, 0,
- dev_name(&pdev->dev), sport);
- if (ret)
- return ret;
- }
} else {
ret = devm_request_irq(&pdev->dev, rxirq, imx_int, 0,
dev_name(&pdev->dev), sport);
diff --git a/include/linux/platform_data/serial-imx.h b/include/linux/platform_data/serial-imx.h
index 3cc2e3c40914..a938eba2f18e 100644
--- a/include/linux/platform_data/serial-imx.h
+++ b/include/linux/platform_data/serial-imx.h
@@ -20,14 +20,9 @@
#define ASMARM_ARCH_UART_H
#define IMXUART_HAVE_RTSCTS (1<<0)
-#define IMXUART_IRDA (1<<1)
struct imxuart_platform_data {
unsigned int flags;
- void (*irda_enable)(int enable);
- unsigned int irda_inv_rx:1;
- unsigned int irda_inv_tx:1;
- unsigned short transceiver_delay;
};
#endif
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
