Hello Aurélien, On Thu, Feb 19, 2015 at 10:15:10AM +0100, aurélien bouin wrote: > 2015-02-18 21:41 GMT+01:00 Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>: > > The transmitter is expected to be controlled by the UART's RTS pin. > > You definately can be more open in using the last patch I have sent > the 11th of februrary using rs485.padding[0] that give in parameter > the GPIO to use for transmit pin you have a link? Without having seen that patch this can well be a separate patch. And (also without having seen the patch) I wonder why the information which gpio to use doesn't come from the device tree but is supplied by userspace. I thought about expanding mctrl-gpio for that, but as there are a few conflicting patches to mctrl-gpio out I wanted to wait until the dust settles. Best regards Uwe -- Pengutronix e.K. | Uwe Kleine-König | Industrial Linux Solutions | http://www.pengutronix.de/ | -- To unsubscribe from this list: send the line "unsubscribe linux-serial" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
