[PATCH_V2 21/34] MIPS: jz4740: only detect RAM size if not specified in DT

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Paul Burton <paul.burton@xxxxxxxxxx>

Allow a devicetree to specify the memory present in the system rather
than probing it from the memory controller. This both saves the probing
for systems where the amount of memory is fixed, and will simplify the
bringup of later jz47xx series SoCs where the memory controller register
layout differs.

Signed-off-by: Paul Burton <paul.burton@xxxxxxxxxx>
Cc: Lars-Peter Clausen <lars@xxxxxxxxxx>
---
 arch/mips/Kconfig         | 1 +
 arch/mips/jz4740/Makefile | 2 ++
 arch/mips/jz4740/setup.c  | 8 +++++++-
 3 files changed, 10 insertions(+), 1 deletion(-)

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 8b377a7..ef82cd3 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -290,6 +290,7 @@ config MACH_JZ4740
 	select GENERIC_IRQ_CHIP
 	select BUILTIN_DTB
 	select USE_OF
+	select LIBFDT
 
 config LANTIQ
 	bool "Lantiq based platforms"
diff --git a/arch/mips/jz4740/Makefile b/arch/mips/jz4740/Makefile
index 61168a2..340dc16 100644
--- a/arch/mips/jz4740/Makefile
+++ b/arch/mips/jz4740/Makefile
@@ -7,6 +7,8 @@
 obj-y += prom.o irq.o time.o reset.o setup.o \
 	gpio.o platform.o timer.o serial.o
 
+CFLAGS_setup.o = -I$(src)/../../../scripts/dtc/libfdt
+
 # board specific support
 
 obj-$(CONFIG_JZ4740_QI_LB60)	+= board-qi_lb60.o
diff --git a/arch/mips/jz4740/setup.c b/arch/mips/jz4740/setup.c
index 8c08d7d..1bed3cb 100644
--- a/arch/mips/jz4740/setup.c
+++ b/arch/mips/jz4740/setup.c
@@ -18,6 +18,7 @@
 #include <linux/io.h>
 #include <linux/irqchip.h>
 #include <linux/kernel.h>
+#include <linux/libfdt.h>
 #include <linux/of_fdt.h>
 #include <linux/of_platform.h>
 
@@ -55,9 +56,14 @@ static void __init jz4740_detect_mem(void)
 
 void __init plat_mem_setup(void)
 {
+	int offset;
+
 	jz4740_reset_init();
-	jz4740_detect_mem();
 	__dt_setup_arch(__dtb_start);
+
+	offset = fdt_path_offset(__dtb_start, "/memory");
+	if (offset < 0)
+		jz4740_detect_mem();
 }
 
 void __init device_tree_init(void)
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux