On Sun, Jan 18, 2015 at 02:41:21PM -0800, Paul Burton wrote: > Introduce a driver suitable for use with the UARTs present in > Ingenic jz47xx series SoCs. These are described as being ns16550 > compatible but aren't quite - they require the setting of an extra bit > in the FCR register to enable the UART module. The serial_out > implementation is the same as that in arch/mips/jz4740/serial.c - which > will shortly be removed. > > Signed-off-by: Paul Burton <paul.burton@xxxxxxxxxx> > Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> > Cc: Lars-Peter Clausen <lars@xxxxxxxxxx> > Cc: linux-serial@xxxxxxxxxxxxxxx > --- > drivers/tty/serial/8250/8250_jz47xx.c | 228 ++++++++++++++++++++++++++++++++++ > drivers/tty/serial/8250/Kconfig | 8 ++ > drivers/tty/serial/8250/Makefile | 1 + > 3 files changed, 237 insertions(+) > create mode 100644 drivers/tty/serial/8250/8250_jz47xx.c This patch blows up on x86 systems, breaking the build :( Sorry, I can't take it. greg k-h -- To unsubscribe from this list: send the line "unsubscribe linux-serial" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
