On Fri, Jan 16, 2015 at 4:00 AM, Chunyan Zhang
<chunyan.zhang@xxxxxxxxxxxxxx> wrote:
> Add a full sc9836-uart driver for SC9836 SoC which is based on the
> spreadtrum sharkl64 platform.
> This driver also support earlycon.
> This patch also replaced the spaces between the macros and their
> values with the tabs in serial_core.h
>
> Signed-off-by: Chunyan Zhang <chunyan.zhang@xxxxxxxxxxxxxx>
> Signed-off-by: Orson Zhai <orson.zhai@xxxxxxxxxxxxxx>
> Originally-by: Lanqing Liu <lanqing.liu@xxxxxxxxxxxxxx>
> ---
> drivers/tty/serial/Kconfig | 18 +
> drivers/tty/serial/Makefile | 1 +
> drivers/tty/serial/sprd_serial.c | 772 ++++++++++++++++++++++++++++++++++++++
> include/uapi/linux/serial_core.h | 3 +
> 4 files changed, 794 insertions(+)
> create mode 100644 drivers/tty/serial/sprd_serial.c
>
> diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
> index c79b43c..969d3cd 100644
> --- a/drivers/tty/serial/Kconfig
> +++ b/drivers/tty/serial/Kconfig
> @@ -1577,6 +1577,24 @@ config SERIAL_MEN_Z135
> This driver can also be build as a module. If so, the module will be called
> men_z135_uart.ko
>
> +config SERIAL_SPRD
> + tristate "Support for SPRD serial"
Can the menu text spell out Spreadtrum. What SPRD means is not obvious.
> + depends on ARCH_SPRD
> + select SERIAL_CORE
> + help
> + This enables the driver for the Spreadtrum's serial.
> +
> +config SERIAL_SPRD_CONSOLE
> + bool "SPRD UART console support"
Same here.
> + depends on SERIAL_SPRD=y
> + select SERIAL_CORE_CONSOLE
> + select SERIAL_EARLYCON
> + help
> + Support for early debug console using Spreadtrum's serial. This enables
> + the console before standard serial driver is probed. This is enabled
> + with "earlycon" on the kernel command line. The console is
> + enabled when early_param is processed.
> +
> endmenu
>
> config SERIAL_MCTRL_GPIO
> diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
> index 9a548ac..4801aca 100644
> --- a/drivers/tty/serial/Makefile
> +++ b/drivers/tty/serial/Makefile
> @@ -93,6 +93,7 @@ obj-$(CONFIG_SERIAL_ARC) += arc_uart.o
> obj-$(CONFIG_SERIAL_RP2) += rp2.o
> obj-$(CONFIG_SERIAL_FSL_LPUART) += fsl_lpuart.o
> obj-$(CONFIG_SERIAL_MEN_Z135) += men_z135_uart.o
> +obj-$(CONFIG_SERIAL_SPRD) += sprd_serial.o
>
> # GPIOLIB helpers for modem control lines
> obj-$(CONFIG_SERIAL_MCTRL_GPIO) += serial_mctrl_gpio.o
> diff --git a/drivers/tty/serial/sprd_serial.c b/drivers/tty/serial/sprd_serial.c
> new file mode 100644
> index 0000000..81839e4
> --- /dev/null
> +++ b/drivers/tty/serial/sprd_serial.c
> @@ -0,0 +1,772 @@
> +/*
> + * Copyright (C) 2012 Spreadtrum Communications Inc.
This is unchanged in 3 years?
> + *
> + * This software is licensed under the terms of the GNU General Public
> + * License version 2, as published by the Free Software Foundation, and
> + * may be copied, distributed, and modified under those terms.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/console.h>
> +#include <linux/delay.h>
> +#include <linux/io.h>
> +#include <linux/ioport.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/serial_core.h>
> +#include <linux/serial.h>
> +#include <linux/slab.h>
> +#include <linux/tty.h>
> +#include <linux/tty_flip.h>
> +
> +/* device name */
> +#define UART_NR_MAX 8
> +#define SPRD_TTY_NAME "ttySPX"
We really want to get away from per SOC serial names and use ttyS for
serial port /dev names. There's issues switching existing drivers
because this creates an ABI, so we can only have new drivers follow
this.
[...]
> +static struct platform_driver sprd_platform_driver = {
> + .probe = sprd_probe,
> + .remove = sprd_remove,
> + .driver = {
> + .name = "sprd_serial",
> + .of_match_table = of_match_ptr(serial_ids),
> + .pm = &sprd_pm_ops,
> + },
> +};
> +
> +static int __init sprd_serial_init(void)
> +{
> + int ret = 0;
> +
> + ret = uart_register_driver(&sprd_uart_driver);
This can be done in probe now. Then you can use module_platform_driver().
Rob
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
