WCH384 4S board is a PCI-E card with 4 DB9 COM ports detected as
Serial controller: Device 1c00:3470 (rev 10) (prog-if 05 [16850])
Signed-off-by: Sergej Pupykin <ml@xxxxxxxxxxxx>
Acked-by: Zany Yan <sirlight@xxxxxxx>
---
drivers/tty/serial/8250/8250_pci.c | 29 ++++++++++++++++++++++++++---
1 file changed, 26 insertions(+), 3 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 31feeb2..d1f8dc6 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1815,7 +1815,7 @@ pci_wch_ch353_setup(struct serial_private *priv,
}
static int
-pci_wch_ch382_setup(struct serial_private *priv,
+pci_wch_ch38x_setup(struct serial_private *priv,
const struct pciserial_board *board,
struct uart_8250_port *port, int idx)
{
@@ -1880,6 +1880,7 @@ pci_wch_ch382_setup(struct serial_private *priv,
#define PCIE_VENDOR_ID_WCH 0x1c00
#define PCIE_DEVICE_ID_WCH_CH382_2S1P 0x3250
+#define PCIE_DEVICE_ID_WCH_CH384_4S 0x3470
/* Unknown vendors/cards - this should not be in linux/pci_ids.h */
#define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584
@@ -2571,13 +2572,21 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
.subdevice = PCI_ANY_ID,
.setup = pci_wch_ch353_setup,
},
- /* WCH CH382 2S1P card (16750 clone) */
+ /* WCH CH382 2S1P card (16850 clone) */
{
.vendor = PCIE_VENDOR_ID_WCH,
.device = PCIE_DEVICE_ID_WCH_CH382_2S1P,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
- .setup = pci_wch_ch382_setup,
+ .setup = pci_wch_ch38x_setup,
+ },
+ /* WCH CH384 4S card (16850 clone) */
+ {
+ .vendor = PCIE_VENDOR_ID_WCH,
+ .device = PCIE_DEVICE_ID_WCH_CH384_4S,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_wch_ch38x_setup,
},
/*
* ASIX devices with FIFO bug
@@ -2876,6 +2885,7 @@ enum pci_board_num_t {
pbn_fintek_4,
pbn_fintek_8,
pbn_fintek_12,
+ pbn_wch384_4,
};
/*
@@ -3675,6 +3685,14 @@ static struct pciserial_board pci_boards[] = {
.base_baud = 115200,
.first_offset = 0x40,
},
+
+ [pbn_wch384_4] = {
+ .flags = FL_BASE0,
+ .num_ports = 4,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ .first_offset = 0xC0,
+ },
};
static const struct pci_device_id blacklist[] = {
@@ -3687,6 +3705,7 @@ static const struct pci_device_id blacklist[] = {
{ PCI_DEVICE(0x4348, 0x7053), }, /* WCH CH353 2S1P */
{ PCI_DEVICE(0x4348, 0x5053), }, /* WCH CH353 1S1P */
{ PCI_DEVICE(0x1c00, 0x3250), }, /* WCH CH382 2S1P */
+ { PCI_DEVICE(0x1c00, 0x3470), }, /* WCH CH384 4S */
};
/*
@@ -5400,6 +5419,10 @@ static struct pci_device_id serial_pci_tbl[] = {
PCI_ANY_ID, PCI_ANY_ID,
0, 0, pbn_b0_bt_2_115200 },
+ { PCIE_VENDOR_ID_WCH, PCIE_DEVICE_ID_WCH_CH384_4S,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0, 0, pbn_wch384_4 },
+
/*
* Commtech, Inc. Fastcom adapters
*/
--
2.2.1
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
