Re: [PATCH] tty/serial_core: Introduce lock mechanism for RS485

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 10/10/2014 15:38, Ricardo Ribalda Delgado :
> Introduce an homogeneous lock system between setting and using the rs485
> data of the uart_port.
> 
> This patch should not be split into multiple ones in order to avoid
> leaving the tree in an unstable state.
> 
> Suggested-by: Alan Cox <alan@xxxxxxxxxxxxxxx>
> Cc: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
> Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
> Cc: Jiri Slaby <jslaby@xxxxxxx>
> Cc: One Thousand Gnomes <gnomes@xxxxxxxxxxxxxxxxxxx>
> Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
> ---
> 
> 
> This patch sits on top of the series: "[PATCH 00/12] Handle TIOC[GS]RS485
> iocts on serial_core"
> 
> If there are major changes on the other patches I will resend the whole
> patchset with this patch as part of it
> 
>  drivers/tty/serial/atmel_serial.c | 10 ++++------
>  drivers/tty/serial/mcf.c          |  5 +----
>  drivers/tty/serial/omap-serial.c  |  3 ---
>  drivers/tty/serial/serial_core.c  | 13 ++++++++++++-
>  4 files changed, 17 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
> index e8df8e4..32b2a8d 100644
> --- a/drivers/tty/serial/atmel_serial.c
> +++ b/drivers/tty/serial/atmel_serial.c
> @@ -293,9 +293,6 @@ static int atmel_config_rs485(struct uart_port *port,
>  {
>  	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
>  	unsigned int mode;
> -	unsigned long flags;
> -
> -	spin_lock_irqsave(&port->lock, flags);
>  
>  	/* Disable interrupts */
>  	UART_PUT_IDR(port, atmel_port->tx_done_mask);
> @@ -326,8 +323,6 @@ static int atmel_config_rs485(struct uart_port *port,
>  	/* Enable interrupts */
>  	UART_PUT_IER(port, atmel_port->tx_done_mask);
>  
> -	spin_unlock_irqrestore(&port->lock, flags);
> -
>  	return 0;
>  }
>  
> @@ -2509,6 +2504,7 @@ static int atmel_serial_probe(struct platform_device *pdev)
>  	struct atmel_uart_data *pdata = dev_get_platdata(&pdev->dev);
>  	void *data;
>  	int ret = -ENODEV;
> +	bool rs485_enabled;
>  
>  	BUILD_BUG_ON(ATMEL_SERIAL_RINGSIZE & (ATMEL_SERIAL_RINGSIZE - 1));
>  
> @@ -2556,6 +2552,8 @@ static int atmel_serial_probe(struct platform_device *pdev)
>  		port->rx_ring.buf = data;
>  	}
>  
> +	rs485_enabled = port->uart.rs485.flags & SER_RS485_ENABLED;
> +

I have the feeling that moving the code chunk that uses this new
variable (rs485_enabled) here ...

>  	ret = uart_add_one_port(&atmel_uart, &port->uart);
>  	if (ret)
>  		goto err_add_port;
> @@ -2574,7 +2572,7 @@ static int atmel_serial_probe(struct platform_device *pdev)
>  	device_init_wakeup(&pdev->dev, 1);
>  	platform_set_drvdata(pdev, port);
>  
> -	if (port->uart.rs485.flags & SER_RS485_ENABLED) {
> +	if (rs485_enabled) {
>  		UART_PUT_MR(&port->uart, ATMEL_US_USMODE_NORMAL);
>  		UART_PUT_CR(&port->uart, ATMEL_US_RTSEN);
>  	}

... (this one ^^^) up where you can test the SER_RS485_ENABLED, can be
even simpler.

otherwise, it seems good so you can add my:

Acked-by: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>

Thanks.

> diff --git a/drivers/tty/serial/mcf.c b/drivers/tty/serial/mcf.c
> index d7be1f1..fdd5c7b 100644
> --- a/drivers/tty/serial/mcf.c
> +++ b/drivers/tty/serial/mcf.c
> @@ -257,12 +257,12 @@ static void mcf_set_termios(struct uart_port *port, struct ktermios *termios,
>  		mr2 |= MCFUART_MR2_TXCTS;
>  	}
>  
> +	spin_lock_irqsave(&port->lock, flags);
>  	if (port->rs485.flags & SER_RS485_ENABLED) {
>  		dev_dbg(port->dev, "Setting UART to RS485\n");
>  		mr2 |= MCFUART_MR2_TXRTS;
>  	}
>  
> -	spin_lock_irqsave(&port->lock, flags);
>  	uart_update_timeout(port, termios->c_cflag, baud);
>  	writeb(MCFUART_UCR_CMDRESETRX, port->membase + MCFUART_UCR);
>  	writeb(MCFUART_UCR_CMDRESETTX, port->membase + MCFUART_UCR);
> @@ -442,10 +442,8 @@ static int mcf_verify_port(struct uart_port *port, struct serial_struct *ser)
>  static int mcf_config_rs485(struct uart_port *port, struct serial_rs485 *rs485)
>  {
>  	struct mcf_uart *pp = container_of(port, struct mcf_uart, port);
> -	unsigned long flags;
>  	unsigned char mr1, mr2;
>  
> -	spin_lock_irqsave(&port->lock, flags);
>  	/* Get mode registers */
>  	mr1 = readb(port->membase + MCFUART_UMR);
>  	mr2 = readb(port->membase + MCFUART_UMR);
> @@ -460,7 +458,6 @@ static int mcf_config_rs485(struct uart_port *port, struct serial_rs485 *rs485)
>  	writeb(mr1, port->membase + MCFUART_UMR);
>  	writeb(mr2, port->membase + MCFUART_UMR);
>  	port->rs485 = *rs485;
> -	spin_unlock_irqrestore(&port->lock, flags);
>  
>  	return 0;
>  }
> diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
> index 9d4726f..6675dbf 100644
> --- a/drivers/tty/serial/omap-serial.c
> +++ b/drivers/tty/serial/omap-serial.c
> @@ -1360,12 +1360,10 @@ static int
>  serial_omap_config_rs485(struct uart_port *port, struct serial_rs485 *rs485conf)
>  {
>  	struct uart_omap_port *up = to_uart_omap_port(port);
> -	unsigned long flags;
>  	unsigned int mode;
>  	int val;
>  
>  	pm_runtime_get_sync(up->dev);
> -	spin_lock_irqsave(&up->port.lock, flags);
>  
>  	/* Disable interrupts from this port */
>  	mode = up->ier;
> @@ -1401,7 +1399,6 @@ serial_omap_config_rs485(struct uart_port *port, struct serial_rs485 *rs485conf)
>  		serial_out(up, UART_OMAP_SCR, up->scr);
>  	}
>  
> -	spin_unlock_irqrestore(&up->port.lock, flags);
>  	pm_runtime_mark_last_busy(up->dev);
>  	pm_runtime_put_autosuspend(up->dev);
>  
> diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
> index b59c925..b574dcd 100644
> --- a/drivers/tty/serial/serial_core.c
> +++ b/drivers/tty/serial/serial_core.c
> @@ -1154,8 +1154,16 @@ static int uart_get_icount(struct tty_struct *tty,
>  static int uart_get_rs485_config(struct uart_port *port,
>  			 struct serial_rs485 __user *rs485)
>  {
> -	if (copy_to_user(rs485, &port->rs485, sizeof(port->rs485)))
> +	unsigned long flags;
> +	int ret;
> +
> +	spin_lock_irqsave(&port->lock, flags);
> +	ret = copy_to_user(rs485, &port->rs485, sizeof(port->rs485));
> +	spin_unlock_irqrestore(&port->lock, flags);
> +
> +	if (ret)
>  		return -EFAULT;
> +
>  	return 0;
>  }
>  
> @@ -1164,6 +1172,7 @@ static int uart_set_rs485_config(struct uart_port *port,
>  {
>  	struct serial_rs485 rs485;
>  	int ret;
> +	unsigned long flags;
>  
>  	if (!port->rs485_config)
>  		return -ENOIOCTLCMD;
> @@ -1171,7 +1180,9 @@ static int uart_set_rs485_config(struct uart_port *port,
>  	if (copy_from_user(&rs485, rs485_user, sizeof(rs485_user)))
>  		return -EFAULT;
>  
> +	spin_lock_irqsave(&port->lock, flags);
>  	ret = port->rs485_config(port, &rs485);
> +	spin_unlock_irqrestore(&port->lock, flags);
>  	if (ret)
>  		return ret;
>  
> 


-- 
Nicolas Ferre
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux