2014-10-09 23:52 GMT+02:00 Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>: > On Thu, Oct 09, 2014 at 06:23:31PM +0200, Matthias Brugger wrote: >> The calculation of value quot for highspeed register set to three >> was wrong. This patch fixes the calculation so that the serial port >> for baudrates bigger then 576000 baud is working correctly. >> >> Signed-off-by: Matthias Brugger <matthias.bgg@xxxxxxxxx> >> --- >> drivers/tty/serial/8250/8250_mtk.c | 2 +- >> 1 file changed, 1 insertion(+), 1 deletion(-) >> >> diff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c >> index 1c4b4bf..4376c48 100644 >> --- a/drivers/tty/serial/8250/8250_mtk.c >> +++ b/drivers/tty/serial/8250/8250_mtk.c >> @@ -81,7 +81,7 @@ mtk8250_set_termios(struct uart_port *port, struct ktermios *termios, >> /* Set to highest baudrate supported */ >> if (baud >= 1152000) >> baud = 921600; >> - quot = DIV_ROUND_CLOSEST(port->uartclk, 256 * baud); >> + quot = (port->uartclk / (256 * baud)) + 1; >> } >> >> /* > > Has this always been incorrect, or was it caused by a specific patch? It has always been incorrect :o > Should it go to the stable kernels? If so, how far back? No need to go to the stable kernels. The driver is only in linux-next. Cheers, Matthias Brugger > > thanks, > > greg k-h -- motzblog.wordpress.com -- To unsubscribe from this list: send the line "unsubscribe linux-serial" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
