[PATCH] tty: serial: 8250_mtk: Fix quot calculation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The calculation of value quot for highspeed register set to three
was wrong. This patch fixes the calculation so that the serial port
for baudrates bigger then 576000 baud is working correctly.

Signed-off-by: Matthias Brugger <matthias.bgg@xxxxxxxxx>
---
 drivers/tty/serial/8250/8250_mtk.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c
index 1c4b4bf..4376c48 100644
--- a/drivers/tty/serial/8250/8250_mtk.c
+++ b/drivers/tty/serial/8250/8250_mtk.c
@@ -81,7 +81,7 @@ mtk8250_set_termios(struct uart_port *port, struct ktermios *termios,
 		/* Set to highest baudrate supported */
 		if (baud >= 1152000)
 			baud = 921600;
-		quot = DIV_ROUND_CLOSEST(port->uartclk, 256 * baud);
+		quot = (port->uartclk / (256 * baud)) + 1;
 	}
 
 	/*
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux