Re: USB to Serial converter code pl2303

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Feb 20, 2014 at 07:19:13PM +0100, Frank Schäfer wrote:
> Am 19.02.2014 18:14, schrieb Johan Hovold:

> > What driver is that? The latest clone-related patch from Frank that I've
> > seen stated:
> >
> > 	"According to Prolific, several (unauthorized) cheap and less
> > 	 functional clones of the PL2303HX chip are in circulation. [1]
> > 	 I've had the chance to test such a cloned device and it turned
> > 	 out that it doesn't support any baud rates above 115200 baud
> > 	 (original: 6 Mbaud) It also doesn't support the divisior based
> > 	 baud rate encoding method, so no continuous baud rate adjustment
> > 	 is possible."
> This patch is still 100% valid.
> The "good" clones are detected as originals, which is fine.

Good to know. Thanks for clarifying.

Care to respin your refined-device-detection patches against the updated
driver in v3.14-rc?

Thanks,
Johan
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux