Re: USB to Serial converter code pl2303

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Feb 19, 2014 at 06:05:54PM +0100, Karsten Malcher wrote:
> Am 19.02.2014 18:00, schrieb Johan Hovold:
> > I need an adapter that can handle 2400 Baud to talk to the
> > ft639/ede639 servo controller chip or possibly a pl2303 driver
> > that is improved.
> > The pl2303-driver can handle 2400 baud, but not sure exactly what baud
> > rates are available for a cloned/pirated pl2303 chip (if that is what
> > you've got). 115200 baud should be supported, though.
> 
> We have tested different baud rates with the PL2303HX china clones.
> All are working including non standard baud rates.

Ok, good, so 2400 baud should work.

> But the non standard baud rates are only available with the modified
> driver from Frank Schäfer.

What driver is that? The latest clone-related patch from Frank that I've
seen stated:

	"According to Prolific, several (unauthorized) cheap and less
	 functional clones of the PL2303HX chip are in circulation. [1]
	 I've had the chance to test such a cloned device and it turned
	 out that it doesn't support any baud rates above 115200 baud
	 (original: 6 Mbaud) It also doesn't support the divisior based
	 baud rate encoding method, so no continuous baud rate adjustment
	 is possible."

Thanks,
Johan
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux