Re: [PATCH 4/6] ARM: shmobile: emev2: Define SMU clock DT bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



[ Cc Laurent ]

On Tue, Sep 24, 2013 at 01:13:31PM +0900, takasi-y@xxxxxxxxxxxxx wrote:
> Device tree clock binding document for EMMA Mobile EV2 SMU.
> Following nodes are defined to describe clock tree.
> - renesas,emev2-smu
> - renesas,emev2-smu-clkdiv
> - renesas,emev2-smu-gclk

I realise this has been entirely consistent in the past and
even as recently as Linus' pre v3.12-rc2 master branch.
However, after some recent discussion we are now trying to make our
compatibility strings consistently of the form renesas,<unit>-<soc>.

With this in mind I believe the strings should be:

- renesas,smu-emev2
- renesas,smu-clkdiv-emev2
- renesas,smu-gclk-emev2

To be honest I am not quite sure about the "-clkdiv" and "-gclk"
bits and I would appreciate some review from others.

I have CCed Laurent as he may have some advice to offer here.

> 
> These bindings are designed manually based on
>  19UH0037EJ1000_SMU : System Management Unit User's Manual
> 
> Signed-off-by: Takashi Yoshii <takashi.yoshii.zj@xxxxxxxxxxx>
> ---
>  .../devicetree/bindings/clock/emev2-clock.txt      | 99 ++++++++++++++++++++++
>  1 file changed, 99 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/emev2-clock.txt
> 
> diff --git a/Documentation/devicetree/bindings/clock/emev2-clock.txt b/Documentation/devicetree/bindings/clock/emev2-clock.txt
> new file mode 100644
> index 0000000..f8649eb
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/emev2-clock.txt
> @@ -0,0 +1,99 @@
> +Device tree Clock bindings for Renesas EMMA Mobile EV2
> +
> +This binding uses the common clock binding.
> +
> +* SMU
> +System Management Unit described in user's manual R19UH0037EJ1000_SMU.
> +This is not a clock provider, but clocks under SMU depend on it.
> +
> +Required properties:
> +- compatible: Should be "renesas,emev2-smu"
> +- reg: Address and Size of SMU registers
> +
> +* SMU_CLKDIV
> +Function block with an input mux and a divider, which corresponds to
> +"Serial clock generator" in fig."Clock System Overview" of the manual,
> +and "xxx frequency division setting register" (XXXCLKDIV) registers.
> +This makes internal (neither input nor output) clock that is provided
> +to input of xxxGCLK block.
> +
> +Required properties:
> +- compatible: Should be "renesas,emev2-smu-clkdiv"
> +- reg: Byte offset from SMU base and Bit position in the register
> +- clocks: Parent clocks. Input clocks as described in clock-bindings.txt
> +- #clock-cells: Should be <0>
> +
> +* SMU_GCLK
> +Clock gating node shown as "Clock stop processing block" in the
> +fig."Clock System Overview" of the manual.
> +Registers are "xxx clock gate control register" (XXXGCLKCTRL).
> +
> +Required properties:
> +- compatible: Should be "renesas,emev2-smu-gclk"
> +- reg: Byte offset from SMU base and Bit position in the register
> +- clocks: Input clock as described in clock-bindings.txt
> +- #clock-cells: Should be <0>
> +
> +Example of provider:
> +
> +usia_u0_sclkdiv: usia_u0_sclkdiv {
> +	compatible = "renesas,emev2-smu-clkdiv";
> +	reg = <0x610 0>;
> +	clocks = <&pll3_fo>, <&pll4_fo>, <&pll1_fo>, <&osc1_fo>;
> +	#clock-cells = <0>;
> +};
> +
> +usia_u0_sclk: usia_u0_sclk {
> +	compatible = "renesas,emev2-smu-gclk";
> +	reg = <0x4a0 1>;
> +	clocks = <&usia_u0_sclkdiv>;
> +	#clock-cells = <0>;
> +};
> +
> +Example of consumer:
> +
> +uart@e1020000 {
> +	compatible = "renesas,em-uart";
> +	reg = <0xe1020000 0x38>;
> +	interrupts = <0 8 0>;
> +	clocks = <&usia_u0_sclk>;
> +	clock-names = "sclk";
> +};
> +
> +Example of clock-tree description:
> +
> + This describes a clock path in the clock tree
> +  c32ki -> pll3_fo -> usia_u0_sclkdiv -> usia_u0_sclk
> +
> +smu {
> +	compatible = "renesas,emev2-smu";
> +	reg = <0xe0110000 0x10000>;
> +	#address-cells = <2>;
> +	#size-cells = <0>;
> +
> +	c32ki: c32ki {
> +		compatible = "fixed-clock";
> +		clock-frequency = <32768>;
> +		#clock-cells = <0>;
> +	};
> +	pll3_fo: pll3_fo {
> +		compatible = "fixed-factor-clock";
> +		clocks = <&c32ki>;
> +		clock-div = <1>;
> +		clock-mult = <7000>;
> +		#clock-cells = <0>;
> +	};
> +	usia_u0_sclkdiv: usia_u0_sclkdiv {
> +		compatible = "renesas,emev2-smu-clkdiv";
> +		reg = <0x610 0>;
> +		clocks = <&pll3_fo>;
> +		#clock-cells = <0>;
> +	};
> +	usia_u0_sclk: usia_u0_sclk {
> +		compatible = "renesas,emev2-smu-gclk";
> +		reg = <0x4a0 1>;
> +		clocks = <&usia_u0_sclkdiv>;
> +		#clock-cells = <0>;
> +	};
> +};
> +
> -- 
> 1.8.1.5
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux