Device tree clock binding document for EMMA Mobile EV2 SMU.
Following nodes are defined to describe clock tree.
- renesas,emev2-smu
- renesas,emev2-smu-clkdiv
- renesas,emev2-smu-gclk
These bindings are designed manually based on
19UH0037EJ1000_SMU : System Management Unit User's Manual
Signed-off-by: Takashi Yoshii <takashi.yoshii.zj@xxxxxxxxxxx>
---
.../devicetree/bindings/clock/emev2-clock.txt | 99 ++++++++++++++++++++++
1 file changed, 99 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/emev2-clock.txt
diff --git a/Documentation/devicetree/bindings/clock/emev2-clock.txt b/Documentation/devicetree/bindings/clock/emev2-clock.txt
new file mode 100644
index 0000000..f8649eb
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/emev2-clock.txt
@@ -0,0 +1,99 @@
+Device tree Clock bindings for Renesas EMMA Mobile EV2
+
+This binding uses the common clock binding.
+
+* SMU
+System Management Unit described in user's manual R19UH0037EJ1000_SMU.
+This is not a clock provider, but clocks under SMU depend on it.
+
+Required properties:
+- compatible: Should be "renesas,emev2-smu"
+- reg: Address and Size of SMU registers
+
+* SMU_CLKDIV
+Function block with an input mux and a divider, which corresponds to
+"Serial clock generator" in fig."Clock System Overview" of the manual,
+and "xxx frequency division setting register" (XXXCLKDIV) registers.
+This makes internal (neither input nor output) clock that is provided
+to input of xxxGCLK block.
+
+Required properties:
+- compatible: Should be "renesas,emev2-smu-clkdiv"
+- reg: Byte offset from SMU base and Bit position in the register
+- clocks: Parent clocks. Input clocks as described in clock-bindings.txt
+- #clock-cells: Should be <0>
+
+* SMU_GCLK
+Clock gating node shown as "Clock stop processing block" in the
+fig."Clock System Overview" of the manual.
+Registers are "xxx clock gate control register" (XXXGCLKCTRL).
+
+Required properties:
+- compatible: Should be "renesas,emev2-smu-gclk"
+- reg: Byte offset from SMU base and Bit position in the register
+- clocks: Input clock as described in clock-bindings.txt
+- #clock-cells: Should be <0>
+
+Example of provider:
+
+usia_u0_sclkdiv: usia_u0_sclkdiv {
+ compatible = "renesas,emev2-smu-clkdiv";
+ reg = <0x610 0>;
+ clocks = <&pll3_fo>, <&pll4_fo>, <&pll1_fo>, <&osc1_fo>;
+ #clock-cells = <0>;
+};
+
+usia_u0_sclk: usia_u0_sclk {
+ compatible = "renesas,emev2-smu-gclk";
+ reg = <0x4a0 1>;
+ clocks = <&usia_u0_sclkdiv>;
+ #clock-cells = <0>;
+};
+
+Example of consumer:
+
+uart@e1020000 {
+ compatible = "renesas,em-uart";
+ reg = <0xe1020000 0x38>;
+ interrupts = <0 8 0>;
+ clocks = <&usia_u0_sclk>;
+ clock-names = "sclk";
+};
+
+Example of clock-tree description:
+
+ This describes a clock path in the clock tree
+ c32ki -> pll3_fo -> usia_u0_sclkdiv -> usia_u0_sclk
+
+smu {
+ compatible = "renesas,emev2-smu";
+ reg = <0xe0110000 0x10000>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ c32ki: c32ki {
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ #clock-cells = <0>;
+ };
+ pll3_fo: pll3_fo {
+ compatible = "fixed-factor-clock";
+ clocks = <&c32ki>;
+ clock-div = <1>;
+ clock-mult = <7000>;
+ #clock-cells = <0>;
+ };
+ usia_u0_sclkdiv: usia_u0_sclkdiv {
+ compatible = "renesas,emev2-smu-clkdiv";
+ reg = <0x610 0>;
+ clocks = <&pll3_fo>;
+ #clock-cells = <0>;
+ };
+ usia_u0_sclk: usia_u0_sclk {
+ compatible = "renesas,emev2-smu-gclk";
+ reg = <0x4a0 1>;
+ clocks = <&usia_u0_sclkdiv>;
+ #clock-cells = <0>;
+ };
+};
+
--
1.8.1.5
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
